Catalogs >
GESERCO >
CE™ Test Kit with ROTG

CE™ Test Kit with ROTG
2Pages

Catalog excerpts

CE™ Test Kit Portable Mini-Lab for testing Oils The GESERCO CE™ Test Kit is a true portable oil analysis mini laboratory. The GESERCO CE™ kit is a stand-alone solution designed for monitoring four main characteristics of the lubricant on the operation site: • • • • Water content Viscosity Dilution Sea water presence* The tests are simple and rapid, and the kit includes a detailed testing and interpretation guide so that the engineer can make immediate decisions for maintaining the lubricated equipment and increasing its lifespan. (* Option) Water Presence The presence of water in oils is a major cause of machinery failure. Water degrades the lubricating properties of the oil, narrows the lubricating film, builds up oxidation and acidity, minimizes the efficiency of additives, accelerates surface fatigue, corrodes components and allows for microbial development… Digital Rapid Oil Test Gauge – Water Presence Large and easy to read display gives step by step instructions. USB port downloads test results to your computer. Simple to use soft keys. Audible alarm for excess water in oil. Built-in memory stores up to 90 tests including pass / fail test evaluation. Last generation sensor gives fast & accurate test results. User-friendly design makes the tester easy to handle. Transparent graduated flask facilitates test monitoring. To overcome the effects of water in the oil, the CE™ kit incorporates GESERCO’s state of the art Rapid Oil Test Gauge which provides accurate digital measurement of water in oil within minutes, even when the oil is massively additived. The GESERCO Rapid Oil Test Gauge is a documenting tester which not only provides fast, simple, accurate results for Water in Oil but also makes it easier to monitor the condition of used oils over time. The measurement principle ISO9114:1997 standard. Test time : 3 minutes or more depending on version Battery life: 2 years (user replaceable battery). 1000 tests including measured data, test evaluation, date and time Mini USB port for downloading tests results and uploading firmware

Open the catalog to page 1

Viscosity & Dilution This test is available in two version, depending on chosen kit: • VISCOBILLETM VCD LED • Falling ball Viscometer VISCOBILLETM V3T LED It allows instant and direct determination of the viscosity and dilution of mono-grade and multigrade oils, VI100 (From10 to 400 cSt @ 40°C / From 30 to 1000 cSt @ 20°C) et ViE150 (From 10 to 200 cSt @ 40°C / From 30 to 500 cSt @ 20 °C). The GESERCO ViscobilleTM VCD is a highly sensitive and accurate tool for cross comparing the viscosity of 1 tested liquid with the viscosities of 2 reference liquids which may set, for instance, the...

Open the catalog to page 2