Bacteria, Fungi, Yeast and Moulds in Petroleum Products The GESERCO bacteria test kit is designed to detect and measure the presence of aerobic bacteria, sulfate reducing anaerobic bacteria, molds, yeast and fungi into petroleum products at the place of storage or use of petroleum products. The test is simple and rapid, and the kit includes detailed instructions for the person in charge of the petroleum product to take immediate curative action. Test Principle The test is based on the dip slide principle: a dedicated sterile culture medium on a plastic carrier is dipped into the liquid to be tested. The culture is then incubated, allowing for microbial growth. When the tested sample contains bacteria, yeast, moulds or fungi, they develop within a few hours on the culture medium. The slides are gridded to make the evaluation of the contamination level easier. Product Codes and specifications Product Code BA9001 BA9002 BA9003 BA9100 Water based fluids including metal machining fluids Water based fluids including metal machining fluids Petroleum distillates including Diesel oil, kerosene, fuel oil Aerobic bacteria Fungi, yeasts, molds Anaerobic sulfate reducing bacteria Aerobic bacteria Fungi, yeasts, molds (1) (*Test results within 16 hours when using the incubator) All kits are delivered complete with user guide. Feel free to contact GESERCO for details Since 1973 GESERCO designs and manufactures a fully comprehensive range of rapid lubricant, fuels and solvent condition monitoring kits. Available worldwide, the Geserco products are applicable to the condition monitoring of mineral, synthetic and bio lubricants, whether they are motor oils, hydraulic oils or machining fluids. 9 RUE CAROLINE AIGLE – 33185 LE HAILLAN – FRANCE (T) +33 5 5634 9229 – (F) +33 5 5634 9544 – [email protected] SPECIFICATIONS MAY CHANGE WITHOUT NOTICE BRO.BACTTEST.GB 20