Capsule pressure gauge with stainless steel case Capsule pressure gauges with elastic element and moving parts in copper alloy manufactured according to EN 837-3 standards. Especially suitable for gaseous media not subjected to vibrations with a maximum temperature not higher than 100ºC. STANDARD PARAMETERS Design: EN 837-3 Closing: Bayonet Mounting: See attached diagram A Threaded connection: Ø63: ¼”BSP; Ø100: ½”BSP (UNE-EN 10226-1) IP protection: IP65 (EN 60529 / IEC 529) Accuracy: Ø63: Class 1.6 / Ø100: Class 1.0 Pressure limits: Static: Full scale Oscillating: 0.9 end of scale Maximum: Full scale Temperature limits: Environment: -40+80°C Fluid: 100°C Range: 0...600 mbar Scale: mbar Subdivision: According to standard EN 837-3 Sensor element: Capsule Pointer: Micrometric adjustment Application: · Gas facilities · Low pressure Case: AISI 304 Stainless steel with bayonet closing Capsule and moving parts: Copper Alloy Threaded connection: Brass Display: Safety glass Dial: White laquered aluminum Pointer: Black laquered aluminum Welding: Cu-Sn 7 point certificate Without certificate 7.Calibration certificate traceable to ENAC M7 Gesa Termómetros S.L. · C/ Barrikako Bidea Pol. Ind. Igeltzera Pabellón D3 · 48610 Urduliz (Bizkaia) SPAIN