Pressure gauge with case in carbon steel Designed to monitor pressure in systems not subjected to vibrations. Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper alloy parts. Especially designed for pneumatic and hydraulic circuits. Manufactured according to EN 837-1 standards. STANDARD PARAMETERS Design: EN 837-1 Closing: Adjusted Mounting: See attached diagram A or B Threaded connection: Ø63: ¼”BSP; Ø75: ⅜”BSP; Ø100: ½”BSP (UNE-EN 10226-1) IP protection: IP54 (EN 60529 / IEC 529) Accuracy: Ø63-Ø75: Class 2.5 / Ø100: Class 1.6 Pressure limits: Static: ¾ end of scale Oscillating: ⅔ end of scale Maximum: Full scale for a short period of time Temperature limits: Environment: -40+80°C Fluid: 80°C Range: -1...0...600 Bar Scale: Bar/Psi Subdivision: According to standard EN 837-1 R1 Sensor element: Bourdon tube (<60 Bar: “C” form; >60 Bar: helical) MATERIALS Case: Carbon steel painted in black · Compressed air · Compressor · Air conditioning · Hydraulics · Pneumatics Bourdon tube and moving parts: Copper Alloy Threaded connection: Brass Display: Glass Dial: White laquered aluminum Pointer: Black laquered aluminum Welding: P<250 Bar: Cu-Sn; P>250 Bar: Cu-Ag DIMENSIONS (mm) DN 7.Calibration certificate traceable to ENAC 7 points certificate Without certificate 5.Threaded connection ½”BSP ⅜”BSP ½”BSPT ⅜”BSPT 2 M2 Gesa Termómetros S.L. · C/ Barrikako Bidea Pol. Ind. Igeltzera