*mydirectindustry

M0101 series

Product catalog summary

Application:
This pressure gauge is designed for use in compressed air systems, compressors, air conditioning, hydraulics, and pneumatic applications. It is suitable for monitoring pressure in systems that are not subjected to vibrations and can be used with gaseous and liquid media that do not obstruct the pressure system or attack copper alloy parts.

Materials:
The case is made of polyethylene, the sensor is a Bourdon tube in a "C" form, and the moving parts are made of copper alloy. The threaded connection is brass, the display is acrylic, the dial is white lacquered aluminum, and the pointer is black lacquered aluminum. Welding is done with Cu-Sn, and the red pointer is made of red plastic.

Standards and Specifications:
The pressure gauge is manufactured according to EN 837-1 standards. It features IP44 protection (EN 60529 / IEC 529) and has an accuracy of Class 2.5. The pressure limits are static at ¾ end of scale, maximum at full scale for a short period, and oscillating at ⅔ end of scale. Temperature limits are -40 to +60°C for the environment and 60°C for the fluid. The threaded connection sizes are Ø40: 1/8” BSPT and Ø50-Ø63: ¼” BSPT (UNE-EN 10226-1).

Pressure Range and Scale:
The pressure range is -1 to 0 to 25 Bar, and the scale is in Bar/Psi.

Dimensions and Weight:
The document provides detailed dimensions for different case diameters (Ø40, Ø50, Ø63) and their respective mounting and connection specifications. Weight details are not specified.

Ordering Information:
To order, specify the case diameter (Ø40, Ø50, Ø63), pressure range (e.g., -1+0, 0+1.6, 0+2.5, etc.), pressure unit (Bar/Psi), mounting type (A or B), threaded connection (¼” BSPT or 1/8” BSPT), connection material (Brass), and whether a calibration certificate traceable to ENAC is required.

Catalog excerpts

Pressure gauge with plastic case Designed to monitor pressure in systems not subjected to vibrations. Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper alloy parts. Especially designed for pneumatic circuits, ﬁlters, pressure regulators... Manufactured according to EN 837-1 standards. STANDARD PARAMETERS Design: EN 837-1 Closing: Adjusted display Mounting: See attached diagram A or B Threaded connection: Ø40: 1/8”BSPT; Ø50-Ø63: ¼”BSPT (UNE-EN 10226-1) IP protection: IP44 (EN 60529 / IEC 529) Accuracy: Class 2.5 Pressure limits: Static: ¾ end of scale Oscillating : ⅔ end of scale Maximum: Full scale for a short period of time Temperature limits: Environment: -40+60°C Fluid: 60°C Pressure range: -1...0...25 Bar Scale: Bar/Psi Subdivision: According to standard EN 837-1 Sensor: Bourdon tube (“C” form) Position pointer: Red pointer (only for ranges 0+4/0+6/0+12) MATERIALS Case: Polyethylene Bourdon tube and moving parts: Copper alloy · Compressed air · Compressor · Air conditioning · Hydraulics · Pneumatic Threaded connection: Brass Display: Acrylic Dial: White laquered aluminum Pointer: Black laquered aluminum Welding: Cu-Sn Red pointer: Red Plastic DIMENSIONS (mm) DN 7 points certiﬁcate Without certiﬁcate 7.Calibration certiﬁcate traceable to ENAC M1 Gesa Termómetros S.L. · C/ Barrikako Bidea Pol. Ind. Igeltzera Pabellón D3 · 48610 Ur

Open the catalog to page 1

M0101 series

M0101 series

Catalog excerpts

All GESA TERMOMETROS catalogs and technical brochures

Archived catalogs