Rigid high temperature pyrometer Gas expansion thermometers manufactured according to EN 13190 standard. Reliable tools that withstand extreme working conditions: engine vibration, humidity and aggressive media such as seawater. Especially designed to measure the temperature of the exhaust gases of the engines. The pyrometer box is filled with silicon oil serving as a vibration dampener. STANDARD PARAMETERS Design: EN 13190 Mounting: See attached diagrams A or B Closing: Ring threaded to case. Sealed by rubber gasket IP protection: IP65 (EN 60529) Accuracy: Class 1.6 Temperature limits: Room temperature: -40+65°C Fluid overtemperature: maximum 15% end of scale Max. pressure on stem: 50 bar Temperature range: +50+650 °C/°F Sensor element: Bourdon tube (Inert gas expansion) Stem length (P): 150; 200; 300; 400 mm Process connection: Sliding on the stem Threaded connection: ½”BSP, ½”NPT, ⅜”BSP, ¾”BSP, M20x150 or M22x150 Antivibration liquid: Silicon oil Vibration damping system: Rigid · Engines · HVAC Case and ring: Black anodized aluminum Moving parts and bourdon tube: Copper alloy Threaded connection: AISI 304 Stainless steel Display: Glass Dial: White lacquered aluminum Pointer: Black lacquered aluminum Stem: AISI 304 Stainless steel Scale printed on the dial (°C) Temperature scale according to DIN 16206 Working range (°C) Subdivision °C/line Maximum error 4.Threaded connection ⅜”BSP M20x150 More on demand ¾”BSP M22x150 5.Connection type Male Female 7.Calibration certificate traceable to ENAC 3 points 6 points 4 points 7 points 5 points Without certificate AISI 304 Stainless steel D5 Gesa Termómetros S.L. · C/ Barrikako Bidea Pol. Ind. Igeltzera Pabellón D3 · 48610 Urduliz (Bizkaia)