Product Information Continuous Mixers picture similar Application areas: • • • • • • Tunnelling Special foundation engineering Shield tunnelling Hydro shield operation Diaphragm wall Cut-off wall • Bentonite slurries • Cut-off wall components Technical Data / Performance Data 1) Mixing capacity Slurry density Mixing components Solids grain size Dosage liquids Dosage solids Dosing capacity solids Drive power mixer GERTEC Maschinen- und Anlagenbau GmbH Gewerbepark 3 D-87477 Sulzberg Phone: +49(0)8376-987 91-0 Fax: +49(0)8376-987 91-99 [email protected] Art.No.: 32172 Edition: 2022-04-06 Technical specifications are subject to change page 1 / 3 Mixer outlet Power connection Power input Voltage Dimensions Weight 1) m3/h kg/m3 1 x liquid / 1 x solid mm hand control valve rotary valve with adjustable speed kg/h 2) kW 3“ standard coupling DIN 14307, alternatively 3“ IG 2“ standard coupling DIN14307, max. 6 bar; alternatively 2” IG 63 A, 5-pole kW V; 50 Hz m ( L x W x H) kg The specified performance data are non-binding values that differ significantly depending on dosing, mixing and discharge times. Theoretical values at 80% degree of filling of the rotary valve and a bulk d

Product Information Continuous Mixers dry running high mixing capacity low installation and commissioning costs optimal mixing quality manual regulation of slurry density automatic operating easy operation and maintenance low operating expenses little space requirement Features: ✓ Colloidal mixer for the preparation of slurries with all necessary inlet and outlet ports and emergency draining ✓ Positioning of mixing motor ✓ Mixing rotor with perforated mixing tools ✓ Mixing drive with three-phase motor and toothed belt drive GERTEC Maschinen- und Anlagenbau GmbH Gewerbepark 3 D-87477 Sulzberg...

Product Information Continuous Mixers Features: ✓ Operation manual and list of spare parts ✓ Electrical function and power control for manual operation and automatic mixing operation (density adjustment manual) Control according to VDE regulations constructed completely ready for use, wired and function tested. The function is controlled by PLC. For operation and control, all necessary monitor display and operating elements are clearly incorporated in the control panel front; operating modes: manual / automatic In manual mode, all drives and valves can be switched individually by lighted buttons...