Pile Turner
18Pages

Much more than just a pile turner

Top quality -Made in Germany Originally the machine was used just for turning paper, to replace manpower by machinery. Nowadays it fulfils many more additional tasks, such as For the demands of the printer or paper and board converter a pile turner with these capabilities represents an indispensable piece of equipment. The Busch pile turner speeds up and improves both the printing and the finishing process. Different sorts of paper and board with varying weights can be handled on the turner. As the demands for quality increase, the pile turner represents a sensible investment. In 1976 the...

Table of contents Top quality -Made in Germany 2 Functions of the pile turner 4 Preferences of a Busch pile turner 6 SPEEDTURNER® SWH Series Sheet size 23.7 x 29.5 inch SWH 90 (R) LA Sheet size 31.5 x 47.2 inch SWH 125 (R) LA SWH 125 RLA (200) Logistic Sheet size 41.8 x 57 inch SWH 155 (R) LA 12 Sheet size 48 x 65 inch SWH 180 (R) LA 12 Special equipment & accessories 13-15 Technical Data 16-19

Functions of the Pile Turner Pile turners are available just as a turning unit or with airing and aligning, and with the additional option of jogging. The following pages give detailed information of all available models and options. Turning is done by hydraulically lifting the pile to the horizontal position and subsequently rotating it through 180°. It replaces time-consuming manual handling. Dust removing An important process before printing to achieve better print quality -absolutely essential for the board converter. Separation of cutting edges To avoid mis-feeds. The complete pile is...

Drying Ink and varnish is quickly dried after printing. Heat inside the pile is reduced. Odour neutralizing Important for food packaging. Airing with ionised air Ionisation reduces the electrostatic charge which may affect the finishing process of coated and printed paper or plastic foil. The pile is aligned against the aligning gauge in the tilted position with high volume airing. Bad sheets can be removed without a problem - depending on the thickness of the material. The ideal support to speed-up perfect alignment of the pile - in the tilted position with high volume airing. The pile can...

- With decades of experience, Busch guarantees perfect engineering - Top quality modern design - Large range of model variations - Embedding in the floor or fixing to the floor is unnecessary An optimal hydraulic system (counter torque lowering valves) and a powerful airing system Blowers for the airing system are integrated in the machine body The platforms allow the use of all sorts of transport and machine pallets. Loading and unloading is made from the wide side The clear aluminium control desk can be fitted on either side The control desk is slewable (on turners with airing) which...

The integrated programmable logic controller (PLC) enables automated airing processes and hydraulic functions as well as a clear fault diagnostic at the display (on all turners with airing) Pile turners of SI SWH series with airing include pressure control flaps as standard. The aligning gauge is adjustable according to sheet width and pile height. The jogging intensity is adjustable at the control desk. Air jets are travelling just under the respective pile height. Alternatively it is possible to pre-select the number of air jet travels (start and stop) to enable an airing process...

The efficient low priced SE Pile Turner for turning, airing, jogging and aligning SE 90 und SE 125 for turning only (without airing), with fixed control desk Options for SE 90: pressure control flaps (the pile is not compressed) for SE 125: pressure control flaps (the pile is not compressed), enlarged opening height of platforms for pile heights up to 68.9 inch and increased carrying power (2650 lbs) SE 90 RLA und SE 125 RLA with airing (1 blower), slewable control desk, fixed aligning gauge, jogging, tilting (15°), regulation of air volume by hand lever located on the machine...

The SWH Pile Turner-powerful and efficient with a lot of options Options additional blower, volume , , , , electrical air volume regulation at the control desk, ionised air SWH 90 LA with airing (1 blower), pressure control flaps, regulation of air (hand lever), adjustable aligning gauge, tilting (15°), slewable control desk SWH 90 RLA the same as SWH 90 LA plus: jogging Max. sheet size inch 23.7 x 29.5 Max. pile height inch 47.2

SWH 125 LA with airing (1 blower), pressure control flaps, regulation of air volume (hand lever), adjustable aligning gauge, tilting (15°), slewable control desk SWH 125 RLA the same as SWH 125 LA plus: jogging Options additional blower, electrical air volume regulation at the control desk, ionised air, enlarged opening height for pile heights up to 68.9 inch, catwalk Note: the minimum pile height will be greater on machines with enlarged opening height

SWH 125 RLA (200) Logistic for loading and unloading from the front as well as from one or both sides for turning, airing, aligning and jogging for transferring piles from mill / machine pallets on to system pallets for centreing the pile on a system pallet either with loading ramps or for embedding in the floor with enlarged opening height (78.7 inch) for higher piles, safety light barriers, manually slewable aligning gauge (adjustable), pressure control flaps, airing with second blower for increased airing power, tilting (15°), slewable control desk, adjustable jogging, electrical air...

for turning only or with airing and aligning, and with the option of jogging SWH 155 and SWH 180 a machine for turning only -without airing and aligning Options pressure control flaps (the pile is not compressed), enlarged opening height up to 78.7 inch for higher piles SWH 155 LA and SWH 180 LA with airing (4 blowers), pressure control flaps, regulation of air volume (hand lever), adjustable aligning gauge, tilting (15°), slewable control desk SWH 155 RLA and SWH 180 RLA the same as SWH 155 LA and SWH 180 LA plus: jogging Options electrical air volume regulation at the control desk,...