Pile Turner for Logistic Systems Model SWH 125 RLA (200) - Logistics Technical Data Performance - The pile turner enables a throughput of 5 - 8 piles per hour - The flexible use of the PLC offers a maximum of different operating sequences Examples: 6 - 8 piles per hour for an exchange of pallets for piles supplied in turned position 5 - 6 piles per hour for an exchange of pallets by double turning Equipment - Airing equipment with two 3 kW blowers and two air jets - Airing position in 15° tilted position of the turning unit - Electrical air volume regulation at the control desk - Vibrating unit for jogging the paper pile in 15° tilted position - Platforms with pressure control flaps (pile is not compressed - air cushion is preserved). Controlled compression of the pile is possible - Aligning gauge with spring stop ends - Loading from the narrow / wide sides - Danger zone on the narrow and wide side is secured by safety light barriers Gerhard Busch GmbH Graphische Maschinen D-21217 Seevetal Brookdamm 28

Pile Turner without ramps, access at ground level Entry from the front side or from the right / left side (depending on the position of the aligning gauge). - Access at ground level. - A rectangular pit (depth of 80 mm) is necessary. - The pile turner is fixed to the floor with dowels. Pile Turner with ramps Entry from the front side or from the right / left side (depending on the position of the aligning gauge). - Access over ramps (length: 120 cm) onto platforms (height: 50 mm). - Floor preparation is not necessary. - The pile turner is fixed to the floor with dowels.