Brochure - Pile Turner series SE and SWH - GB version with metric units
20Pages

Pile Turner Much more than just a pile turner

Top quality – Made in Germany Originally the machine was used just for turning paper, to replace manpower by machinery. Nowadays it fulfils many more additional tasks, such as Airing · Dust removing · Drying · Aligning · Jogging For the demands of the printer or paper and board converter a pile turner with these capabilities represents an indispensable piece of equipment. The Busch pile turner speeds up and improves both the printing and the finishing process. Different sorts of paper and board with varying weights can be handled on the turner. As the demands for quality increase, the pile...

Table of contents Top quality – Made in Germany Functions of the pile turner Preferences of a Busch pile turner SE Series Sheet size 600 x 750 mm SE 90 SE 90 RLA SPEEDTURNER® SWH Series Sheet size 600 x 750 mm SWH 90 (R) LA Sheet size 800 x 1200 mm SWH 125 (R) LA SWH 125 RLA (200) Logistic Special equipment & accessories 13-15 Technical Data

Functions of the Pile Turner Pile turners are available just as a turning unit or with airing and aligning, and with the additional option of jogging. The following pages give detailed information of all available models and options. Turning – easy and comfortable Turning is done by hydraulically lifting the pile to the horizontal position and subsequently rotating it through 180°. It replaces time-consuming manual handling. Airing – what can be achieved? Dust removing An important process before printing to achieve better print quality absolutely essential for the board converter....

Drying Ink and varnish is quickly dried after printing. Heat inside the pile is reduced. Odour neutralizing Important for food packaging. Airing with ionised air Control desk Ionisation reduces the electrostatic charge which may affect the finishing process of coated and printed paper or plastic foil. Aligning the pile The pile is aligned against the aligning gauge in the tilted position with high volume airing. Bad sheets can be removed without a problem – depending on the thickness of the material. Aligning gauge (adjustable) The ideal support to speed-up perfect alignment of the pile –...

Preferences of a Busch Pile Turner Two model series are available – the efficient low priced SE series and the SPEEDTURNER® SWH series for high demands. – – – – – – – – – – With decades of experience, Busch guarantees perfect engineering Top quality modern design Large range of model variations Embedding in the floor or fixing to the floor is unnecessary An optimal hydraulic system (counter torque lowering valves) and a powerful airing system Blowers for the airing system are integrated in the machine body The platforms allow the use of all sorts of transport and machine pallets. Loading...

Advantages – – The integrated programmable logic controller (PLC) enables automated airing processes and hydraulic functions as well as a clear fault diagnostic at the display (on all turners with airing) Pile turners of SPEEDTURNER® SWH series with airing include pressure control flaps as standard. The aligning gauge is adjustable according to sheet width and pile height. The jogging intensity is adjustable at the control desk. Air jets are travelling just under the respective pile height. Alternatively it is possible to pre-select the number of air jet travels (start and stop) to enable...

for turning only (without airing), with fixed control desk for SE 90: pressure control flaps for SE 125: pressure control flaps (the pile is not compressed), enlarged opening height of platforms for pile heights up to 1750 mm and increased carrying power (1200 kg) for turning, airing, jogging with airing (1 blower), slewable control desk, fixed aligning gauge, jogging, tilting (15°), regulation of air volume by hand lever located pressure control flaps

The SWH Pile Turner – powerful and efficient with a lot of options SWH 90 (R) LA for turning, airing and aligning, with the option of jogging SWH 90 LA with airing (1 blower), pressure control flaps, regulation of air volume (hand lever), adjustable aligning gauge, tilting (15°), slewable control desk additional blower, electrical air volume regulation at the control desk, ionised air SWH 90 RLA the same as SWH 90 LA plus: jogging Model Series SWH 90 Modell Platform width Platform depth Carrying power

SWH 125 (R) LA for turning, airing and aligning, with the option of jogging Rear view SWH 125 LA with airing (1 blower), pressure control flaps, regulation of air volume (hand lever), adjustable aligning gauge, tilting (15°), slewable control desk SWH 125 RLA the same as SWH 125 LA plus: jogging Platform width Platform depth Carrying power additional blower, electrical air volume regulation at the control desk, ionised air, enlarged opening height for pile heights up to 1750 mm, catwalk Note: the minimum pile height will be greater on machines with enlarged opening height Model Series SWH...

SWH 125 RLA (200) Logistic for loading and unloading from the front as well as from one or both sides for turning, airing, aligning and jogging for transferring piles from mill / machine pallets on to system pallets for centreing the pile on a system pallet either with loading ramps or for embedding in the floor with enlarged opening height (2000 mm) for higher piles, safety light barriers, manually slewable aligning gauge (adjustable), pressure control flaps, airing with second blower for increased airing power, tilting (15°), slewable control desk, adjustable jogging, electrical air...

SWH 155 (R) LA / 180 (R) LA for turning only or with airing and aligning, and with the option of jogging SWH 155 and SWH 180 a machine for turning only without airing and aligning SWH 155 RLA and SWH 180 RLA the same as SWH 155 LA and SWH 180 LA plus: jogging pressure control flaps (the pile is not compressed), enlarged opening height up to 2000 mm for higher piles electrical air volume regulation at the control desk, enlarged opening height up to 2000 mm for higher piles, catwalk, telescopic control desk SWH 155 LA and SWH 180 LA with airing (4 blowers), pressure control flaps, regulation...