Catalogs >
Geovent >
LSFG/ MSFG 146- 250 LSX/MSX Fans

LSFG/ MSFG 146- 250 LSX/MSX Fans
6Pages

Catalog excerpts

GEOVENT centrifugal fan LSFG and MSFG with forward curving impeller is used for extraction within the industry or for comfort ventilation, depending on the variant. The fan is made of 100% galvanized steel for optimum corrosion resistance and therefore, it is suitable for outdoor installation on the roof or on the wall. There is a complete program of accessories, and the fan can be delivered with a number of options, such as flex connection, mountings, rainshield, motor protection, pressure monitor and soundproof box. As standard we supply supporting angels with vibration absorbers, inlet nozzle with net and clamp for mounting the outlet flange. The fan is also supplied in ATEX version according to the 2014/34/EU directive. Then the type is called LSX/ MSX, and it is supplied as standard with EExE motor. Other variants are offered on inquiry. On inquiry it is possible to deliver the fan with built-in frequency converter, two-speed motor, with 6- or 8-poled motors, motors with special voltage or higher efficiency, special high temperature version a.s.o. Air volume up to: 4.900 m3/h Technical data / Other data / Features Motor: Directly driven by a 85-Flange motor. Sealing class IP-55 Voltage: 3x400V or 1x230V / 50 Hz 3 of the fans sides can be used as mounting flange. Made of hot-galvanized plate. All screws and bolts are electro galvanized. Inclusive supporting angels with vibration absorbers, inlet nozzle with net and clamp for mounting the outlet flange.

Open the catalog to page 1

LSFG/MSFG 146 - 250 - LSX/MSX ATEX versions Pressure drop - LSFG/LSX Pressure drop - MSFG/MSX The fans ampere usage is based on 3x400V motors. When 1x230V motors (Fan sizes 146-225) are used, is it possible to use a factor on about 2.7 to get the approximate ampere usage (can vary depending on model) The air measurements are made without using an outlet flange on the outlet side and by a temperature on 20°C. The pressure lost measured in Pascal indicate the static pressure. The fans ampere usage is based on 3x400V motors. When 1x230V motors (Fan sizes 146-200) are used, is it possible to...

Open the catalog to page 2

LSFG/MSFG 146 - 250 - LSX/MSX ATEX versions Dimension table Fans LSFG/MSFG 146-250 NB: By LSX/MSX versions the motor will typically have a larger physical measure than standard versions, and therefore it will also have a higher net weigh.

Open the catalog to page 3

LSFG/MSFG 146 - 250 - LSX/MSX ATEX versions Soundproof box for reduction of the sound level. The fan is enclosed in a closed wind- and waterproof galvanized box. The sound is typically subdued to 8-15 dB(A) Wall bracket, hot-galvanized, is supplied in two sizes, For mounting the fan on wall Must be used with supporting angels. Galvanized rain shield for the fan. Protects the motor from water intrusion Outlet flange, hot-galvanized, is supplied in several Different sizes. Is used as transition from the fan’s square yield to a round channel. Sound data

Open the catalog to page 4

LSFG/MSFG 146 - 250 - LSX/MSX ATEX versions A. B. C. D. E. A. Outlet flange, transition from the fan’s square yield to a round channel. The outlet flange, which is a sleeve, has an EPDM rubber packing in sealing class C. By using vibration dampers a flexible connection between the outlet flange and the yield can be insert. . B. Clamp, galvanized, is used for attachment of the outlet flange with the aid of 6 pcs. M6 screws. After mounting you must use joint filler. C. nlet in sleeve, galvanized, is provided with net to protect the fans impeller and EPDM rubber packing in sealing I class c....

Open the catalog to page 5

Our series of atex fans with forward curving impeller are as standard supplied with EEx e motors, but can also be supplied with EEx d or EEx de motors. The typical scope of application is zone 1, zone 2 and zone 22. The construction is based on standard LSFG/MSFG, but has beside the ATEX motor, also protection against static and sparks in inlet. For ATEX applications, where acid proof execution is needed, this can be offered. All plate parts, screws and bolts a.s.o. are supplied in rustproof ANSI 316L and are subsequently stained. The wheel is either supplied in a special lacquered edition...

Open the catalog to page 6