Catalogs >
Geovent >
Grinding/Welding table

Grinding/Welding table
1Pages

Catalog excerpts

Workplace design Grinding/welding table Geovent grinding/welding table is used when grinding with grinder or welding. The table is designed for catching metal dust and welding smoke as the suction is placed directly in the path of the grinding particles. The grinding table is available with or without rear panel. The rear panel is constructed in steel with highly efficient extraction gaps. The rear panel is only available as standard for 02-002 and 02-005. Welding table. Ordering table Art. No. Description 02-001 02-002 02-003 02-005 02-006 Welding table – 600x600x800 mm (WxDxH) Air ﬂow needed: ca. 1.500m³/h – connecting piece: ø160 mm Welding table – 900x600x800 mm (WxDxH) Air ﬂow needed: ca. 2.000m³/h – connecting piece: ø200 mm Welding table – 1.200x600x800 mm (WxDxH) Air ﬂow needed: ca. 2.500m³/h – connecting piece: ø250 mm Welding table – 1.800x1.000x800 mm (WxDxH) Air ﬂow needed: ca. 6.000m³/h – connecting piece: ø315 mm Welding table – 2.500x800x800 mm (WxDxH) Air ﬂow needed: ca. 6.500m³/h – connecting piece: 2xø315 mm (in both ends of the table) Description Back draft panel - 900x185x600mm (WxDxH) Air ﬂow needed: ca. 1.000 - 1.500 m³/h - connecting piece: ø200 mm with collection drawer Corner console for rear edge extraction panel Bracket for mounting backdraft extraction on welding table (set of 4 pcs.) The rods can easily be moved / changed if needed.

Open the catalog to page 1