Exhaust Nozzles
15Pages

Exhaust Extraction Rubber nozzles for Exhaust GEOVENT A/S offers a number of nozzles for extraction of exhaust fumes, for example, in garages or other places where you need to start vehicles indoors. The various nozzles are adapted to different car sizes/ exhausts and workshop/ employee needs. Today, this task is more complex due to vehicle manufacturer’s production of many different car variants/exhaust pipes. The nozzles are available with or without a damper, can be mounted with quick couplings, and can be attached to hose lifts, channel ducts and hose reels. If you cannot find the desired nozzle in our range, ask us and we will make an effort to get it. Exhaust nozzles HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: salg@geov

Rubber Nozzles for Exhaust SK – nozzle. Powder coated steel with flap and opening for CO-probe Type SK nozzles with spring-loaded flap, fit single exhaust pipes. The nozzle can be mounted on systems with quick couplings, hose lifts, channel ducts and hose reels. Dimensions are ø80 mm, ø100 mm, ø125 mm, ø150 mm, and with extended diameter ø100/130 and ø125/150. The nozzles have outlets for CO test. Nozzles are available in the following sizes: Art. No

Rubber Nozzles for Exhaust HT – nozzle. Powder coated steel with vice grip for very hot exhaust Type HT is a nozzle equipped with adjustable vice grip and holes for cooling air. HT suction nozzle is painted in matt black. It may be used on military vehicles where the exhaust temperature is very high. Nozzles are available in the following sizes: Art. No. HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: s

Rubber Nozzles for Exhaust S – funnel shaped rubber nozzle. Available with opening for CO-probe Type S is a soft and gentle rubber nozzle. It has internal grooves for better fit onto the exhaust pipe. Available in ø80, ø100, ø125 mm hose connection. With this nozzle, the risk of scratching the vehicle is minimized. Type S is the reasonably priced rubber nozzle. Nozzles are available in the following sizes: Art. No.

Rubber Nozzles for Exhaust SA – funnel shaped rubber nozzle with vice grip Type SA is a very soft and gentle nozzle supplied with or without tight damper. Available in sizes ø100 - ø125 and ø150 mm. This nozzle is available with automatic damper, which opens at the moment the nozzle attaches the exhaust pipe. The nozzle is suitable for a wide range of vehicles, and the risk of scratching the vehicle is lower. Nozzles are available in the following sizes: Art. No.

Rubber Nozzles for Exhaust SE – oval rubber nozzle with vice grip and 60° bend Type SE nozzle is an oval rubber nozzle with vice grip and 60˚ bend. The nozzle fits a wide range of vehicles - individual and dual exhausts and is gentle on the vehicle. Available in dimensions ø80, ø100, ø125 mm for passenger cars and ø125 and ø150 mm for trucks. This oval nozzle with 60° tilt and vice grip makes the nozzle easy to put on the exhaust pipe. Nozzles are available in the following sizes: Art. No

Rubber Nozzles for Exhaust PO – oval rubber nozzle with 60° bend Type PO nozzle is an oval rubber nozzle with 60° bend. Suitable for single and dual exhaust up to 125/65 mm. Hose connection ø80 mm or ø100 mm. Nozzles are available in the following sizes: Art. No. HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: s

Rubber Nozzles for Exhaust GeoFlexGrip – oval rubber nozzle which closes when not in use Type GeoFlexGrip nozzle is an inexpensive rubber nozzle that has built-in damper and clamp function. The flexible design makes the nozzle an optimal choice, since it can be used for small and medium-sized cars with different sized exhaust pipes. Easy installation on the exhaust pipe is done by squeezing rubber nozzle, so it is opened and can attach itself. When the oval rubber nozzle is dismounted from the exhaust pipe, it drawn the “lips” together and ensures that the exhaust gases do not come back to...

Rubber Nozzles for Exhaust SB – round rubber nozzle with bellows for hand pump or compressed air Type SB nozzle attaches on to the exhaust pipe by means of the inflatable air-bellow. Can be connected by compressed air system at 1 bar. Can also be used with hand pump with vent valve. The nozzle is available in sizes for both cars and trucks. Available with kevlar for use at high temperatures. Ideal for use where vehicle should be decoupled automatically. SB – round rubber nozzle Nozzles are available in the following sizes: Art. No. HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211...

Rubber Nozzles for Exhaust SBM – oval rubber nozzle with bellows for hand pump or compressed air Type SBM is an oval nozzle, which can be activated by a hand pump or comprise air of max 1 bar pressure. The hand pump is provided with a vent valve, which releases the nozzle from the exhaust pipe. This nozzle is for both passenger cars and commercial vehicles with single and dual exhaust pipes. NB: Versions with double bellows are available on request. SBM – oval rubber nozzle Nozzles are available in the following sizes: Art. No. SBM 120/40 (mini and smaller cars) SBM 200/100 (smaller lorries...

Rubber Nozzles for Exhaust SBM – oval rubber nozzle with bellows for hand pump or comprised air with 45° bend Type SBM is an oval nozzle with 45° bend, which can be activated by a hand pump or comprise air of max 1 bar pressure. The hand pump is provided with a vent valve, which releases the nozzle from the exhaust pipe. This nozzle is for both passenger cars and commercial vehicles with single and dual exhaust pipes. SBM – oval rubber nozzle Nozzles are available in the following sizes: Art. No. SBM 150/80 (small and medium sized cars) SBM 150/80 (medium and larger cars less than 3,0 L)...