Extraction Arms COMPACT arm ø160 and ø200 mm Geovent COMPACT arm is the perfect extraction solution, when the room height is low at the working place, e.g. in welding boxes. The COMPACT arm gives with its telescope function the perfect balance between larger arm’s sucktion capacity and smaller arm’s smooth operation. When the work is done – you push the arm up and away, and therefore it requires a minimum of space. The arm is mainly used for welding of smaller subjects, where time and space is scarce. The arm is supplied ready for mounting in the ceiling (360° turn able) or at the wall (wall bracket necessary), with a separate fan or connected to a central extraction system. The arm can be extended up to 7 m by means of an extension arm. COMPACT arm Description Ceiling bracket: 360° turn able - Steel console in powder coating with brass bearing and VA rubber sealing ring. Hood: Light weight hood in ø160 or ø200 mm. The hood is equipped with an integrated ergonomic handle. Covered in powder coating yellow RAL1007. Arm: Aluminum profiles with tension springs and sliding bearing. Hose: Black Weld in strong PVC/ polyester web with steel spiral. Temperature from - 40°C to + 100°C. For further information on installation requirements etc., please refer to our instruction manual. COMPACT arm 1-2m installed and including automatic control devices for automatic start/stop of the fan and motor damper.