Extraction arms Geovent ASA-4 extraction arm for welding fumes, grinding dust and fumes etc, where the operators needs are in focus when it comes to maneuverability, ergonomic and efficiency. The hose and ALU duct are mounted on the outside of the carrying arm, in order to let the air flow pass more freely resulting in the lowest possible pressure drop. The arm is mainly constructed in ALU parts, in order to keep the total weight down, which result in smooth operation. The arm has 3 stables and 3 turning points. The arm can be extended up to 8m by means of extension arms. The ASA4 is available in length of 2 m, 3 m, and 4 m. The ASA-4 arm is a duct arm with external carrying arm and aluminum duct with hose, see picture. ASA-4 has a lower pressure drop, than the ASA-3, but use and construction is basically almost the same as the ASA-3. Wall bracket: Steel console in powder enamel yellow RAL 1007. The console is turn able up to 180°. Hood: Light weight aluminum hood in 0160 or 0200mm, which is equipped with an integrated ergonomic handle. The hood is as standard covered in powder enamel yellow RAL 1007. Move able in all possible positions. Can be supplied in custom made colors upon request/ surcharge. Arm and friction joints: 25x25 mm aluminum pipe, connected via joints with friction discs and plate springs. Inner arm part is reinforced with 30x30 mm EL-galvanized bracket and equipped with gas spring. Capacity: Up to 2.000 m3/h (depending on 0 diameter), which makes it suitable for all types of welding fumes and glue fumes, where large airflows are required. Typical use: 0160 mm = 800-1.000 m3/h for MIG/MAG welding in black steel 0200 mm = 800-1.000 m3/h for MIG/MAG welding in stainless steel Recommended installation height: min. 2.500 mm. For further information on installation requirements etc., please refer to our instruction manual. Ordering table

ASA-4 arm with alu Pressure drop Dimensional drawing of the wall bracket 3 Luftmængde Air Flow (m[m³/h] /h) Dimensional drawing of the extension arm Special Solution HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: