Extraction Arms COMPACT arm ø160 and ø200 mm Geovent Compact-arm is the perfect extraction solution, when the room height is low at the working place, e.g. in welding boxes. The compact arm gives with its telescope function the perfect balance between larger arm’s suck capacity and smaller arm’s smooth operation. When the work is done – you push the arm up and away, and therefore it requires a minimum of space. The arm is mainly used for welding of smaller subjects, where the time and space are scarce. The arm is supplied ready for mounting the ceiling (360° turn able) or at the wall (wall bracket necessary), with separate fan or for central system. The arm can be extended up to 7 m by means of extension arms. Description Ceiling bracket - 360° turn able: Steel console in powder enamel with brass bearing and VA rubber packing ring. Hood: Light weight hood in ø160 or ø200 mm. The hood is equipped with an integrated ergonomic handle. Covered in powder enamel yellow RAL1007. Arm: Aluminum profiles with tension springs and sliding bearing. Hose: Black Weld in strong PVC/ polyester web with steel spiral. Temperature from - 40°C to + 100°C. Compact arm 1-2m installed and including automatic control devices for automatic start/stop of the fan and motor damper.

Accessoris COMPACT armen Description Typical height over table: 1 - 1.75 m Ceiling consol ø160 mm, lengths 0,4 – 1,2 m. Ceiling consol ø160 mm, lengths 1,2 – 2,4 m. Ceiling consol ø200 mm, lengths 0,4 – 1,2 m. Ceiling console Ceiling consol ø200 mm, lengths 1,2 – 2,4 m. White COMPACT arm, customized design.