Catalogs >
Geovent >
Channel duct

Channel duct
3Pages

Catalog excerpts

Channel duct type 35 Geovent channel duct type 35 for the extraction of exhaust gases, welding fumes, etc. With up to 100 m of duct, the channel duct gives the user a large working area. There are no fixed extraction points, as the trolley can be moved to where it is needed. The channel duct can be equipped with a larger number of trolleys, depending on the project design. The channel duct is optimally used in linear flow car inspections as well as in medium and large workshops. User-friendly The hose trolley type 35 is equipped with 8 easy-running nylon wheels, which provide effortless movement of the trolley. At the same time, heavy hoses on the floor are avoided. The hose reel can be supplied with various accessories to make everyday life easier for the operator including remote controlled electric motors on the trolley, and compressed air nozzles for automatic exhaust decoupling. Ease of installation We have put great emphasis on making our channel duct and the accessories as easy to install as possible. The new design incorporates several new features, to improve function and to reduce installation and service costs. Specific benefits • The system is easier to install, thus saving time. • verything can be mounted in the ceiling and finally the E channel duct is lifted into place and fixed. • It is easier to install on an angled ceiling, etc. • he rubber lips are easily clicked in and fixed with T barbs. No screwing required. • t is easier to move the trolley as there is less friction in I the lips and the trolley is lighter. • PDM lips and now also silicone lips are available. The E silicone can withstand temperatures up to 180°C and has lower friction than EPDM. • The end cap has an edge to make it easier to fix • Duct connection from the side is possible • uct connection from the top available in 2 different verD sions • ires for stabilisation are used instead of rods, so they W can be easily adapted to the desired length. Channel duct type 35 Channel duct type 35 extruded aluminium with EPDM rubber lips, max. 120°. Height: 288 mm. Width: 178 mm. Channel = 260 cm² = ø180 duct. 7 kg pr. meter. Lengths of 3 and 6 meter. Price per meter. Channel duct type 35 extruded aluminium with Silicone rubber lips, max. 180°. Height: 288 mm. Width: 178 mm. Channel = 260 cm² = ø180 duct. 7 kg pr. meter. Lengths of 3 and 6 meter. Price per meter. Trolley type 35, powder coated steel. Complete with 8 smooth-running nylon wheels and ø150 mm NP connection. For air flows up to 1.200 m³/h. Trolley type 35 for extraction arms ø160 mm. For air flows up to 1.200 m³/h.

Open the catalog to page 1

Channel duct type 35 Technial Drawing, trolley 600 Cross section of trolley Any reproduction or use of this drawing is prohibited without written consent from GEOVENT. Description: Scale: Surface finish: General tolerances Din 7168 : Middle Grade Pressure drop for Channel Duct type 35 Surface finish: Any reproduction or use of this drawing is prohibited without written consent from GEOVENT. Surface finish: Description: Default units are mm. Scale: Revision: ---- Parts List Created: Created by: 01-06-2022 Dan Christensen Scale: Number Part Lifecycle: General tolerances Revision: Any 7168 :...

Open the catalog to page 2

Channel duct type 35 Ordering table for Channel duct Pos. Channel bracing for channel duct. Channel assembly bracketof for connecting 2 lengths of channel duct. Spring end stop for trolley Suspension kit for 1m channel duct - Content: Suspension bracket, ceiling bracket, channel fittings, suspension profile and wiring kit 1 kit required for each point of fixation. Suspension kit for 2m channel duct - Content: Suspension bracket, ceiling bracket, channel fittings, suspension profile and wiring kit 1 kit required for each point of fixation. Suspension bracket in galvanized steel Ceiling...

Open the catalog to page 3