Catalogs >
Geovent >
ASA-3 Arm

ASA-3 Arm
2Pages

Catalog excerpts

Extraction arms ASA-3 arm, ø80, ø100, ø125, ø160 and ø200 mm GEOVENT ASA-3 extraction arm for welding fumes, grinding dust and fumes etc, where the operators needs are in focus when it comes to maneuverability, ergonomic and efficiency. The hose is mounted on the outside of the carrying arm. The arm has 3 stables and 2 turning points, which result in smooth operation. The arm can be extended up to 8 m. by means of extension arms. The ASA-3 is available in length of 2.0m, 3.0 m and 4.0 m. Description Wall bracket: Steel console in powder enamel yellow RAL1007. The console is turn able up to 180°. Hose: Black P2A1000 in strong PVC with steel spiral. Temperature from -40°C to +100°C. Hood: Light weight hood in ø80, 100, 125, 160 or ø200mm. The ø160 & ø200 mm hood is equipped with an integrated ergonomic handle. The hood is as standard covered in powder enamel yellow RAL1007. Move able in all possible positions. Arm and friction joint: 25x25 mm aluminum pipe, connected via joints with friction discs and plate springs. Inner arm part is reinforced with 35x35 mm aluminum pipe and equipped with gas spring. Capacity: Up to 2.000 m3/h, which makes it suitable for all types of welding fumes and glue fumes, where large airflows are required. Hood ø160 mm Special Solution

Open the catalog to page 1

Dimensional drawing of the wall bracket ASA-3 2m ASA-3 arm 2m Tryktab Dimensional drawing of the extension arm ASA-3 arm 2,0 m ø200 mm, complete ASA-3 arm 3,0 m ø200 mm, complete ASA-3 arm 4,0 m ø200 mm, complete Air tight damper ø80 Air tight damper ø100 Air tight damper ø125 Air tight damper ø160

Open the catalog to page 2