Catalogs >
GeoSIG Ltd >
VE-1x Velocity Sensor

VE-1x Velocity Sensor
2Pages

Catalog excerpts

GeoSIG Ltd Wiesenstrasse 39 8952 Schlieren Switzerland r Wide Full Scale Range, ± 1 to ± 100 mm/s r Bandwidth 1 Hz to 315 Hz r Civil Engineering and general vibration measurement applications r Built-in Impulse Test Circuit r Single Bolt Mounted Housing provides up to ± 10° of Levelling Adjustment Outline The VE Velocity Sensors are engineered for consistent performance over a long lifetime. Advanced computerised testing, manufacturing techniques and quality control are used in the production process to provide both, the uniform parameters and the rugged qualities required in modern velocity sensors. The VE Velocity Sensors operate from a wide range of input voltages and can be used for a variety of civil engineering and general vibration measurement applications. The VE-11-H is uniaxial horizontal, the VE11-V uniaxial vertical, VE-12 biaxial and the VE-13 is a triaxial velocity sensor. With the new VE-1x, 1 Hz Velocity Sensor now it is The VE Velocity Sensors are housed in a very compact possible to measure vibrations in accordance with DIN 195 x 112 x 96 mm case. The sealed cast aluminium 45669-1. housing contains a MS style connector or a sealed cable inlet. The housing also incorporates a single bolt mount The sensor module has proven itself successfully worldwith three levelling screws, which offers extended wide for many years in different applications. The adjusting capability during mounting. symmetrical rotating dual coil construction minimises the force on the spring arms. The use of precious metals ensure optimum electrical contact and a long operating life

Open the catalog to page 1

Full Scale Range: Output Impedance: Self Test: Measuring Range: Environment / Housing Housing Type: Cast aluminium Sealed access cover 195 x 112 x 96 mm 2.0 kg IP 65 optional IP 68 -25 to 85 °C (operating) -40 to 100 °C (storage) 0 to 100 % (non-condensing) Single bolt, surface mount, adjustable within ± 10° Temperature Range: Humidity: Mounting: Connector Pin Configuration Pin 1-2, 3-4, 5-6 Signal output for axis X, Y, Z Pin 7-8 Test input, Digital test-pulse (0 – 12 V) Pin 9-10 +12 VDC Power Supply Pin 11-12 Sensor Mode Case Shielded Ground Digital grade long travel geo-phones > 96 dB <...

Open the catalog to page 2