AC-7x-DH Accelerometer
2Pages

GeoSIG Ltd Wiesenstrasse 39 8952 Schlieren Switzerland AC-73-DH / AC-72-DH / AC-71-DH Force Balance Accelerometer r True Electro-mechanical Force Balance Accelerometer r Earthquake and Structural monitoring r Built-in compass as well as tilt, temperature and humidity sensors r Ambient seismic noise monitoring r Oceanbottom seismic monitoring r Extremely robust downhole housing r Suitable for borehole diameters of 100 mm and larger r Proprietary iSensor™ interface r Dynamic Range 165 dB r Full Scale ± 0.5, 1, 2, 3 or 4 g r Bandwidth from DC to 200 Hz The AC-73-DH sensor package is a true electromechanical triaxial downhole accelerometer designed for broadband earthquake monitoring as well as applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic testing. The rugged mass suspension moving coil system improves the signal to noise ratio. The magnetic system and capacitive position sensors offer symmetrical controls for the accurate electronic centring of the mass. At rest the accelerometer mechanism is in balance and no electrical output is generated. In case of a ground motion, AC-73-DH yields an electrical output proportional to the current used to keep the mass centred. This output signal is precisely calibrated to provide a signal at the utmost accuracy and with a lowest possible noise level. The symmetrical positioning system incorporated with the force balance accelerometer principle, the accelerometer faithfully keeps its scaling and calibration even under extreme conditions. The DC response allows the sensor to be tilt tested or recalibrated in the field. With the help of the test line the AC-73-DH accelerometer can be completely tested assuring proper operation and accurate acceleration measurement. This test line is internally connected to the external world only when a given command is sent to the sensor to avoid any noise pick-up through the test input. The AC-73-DH is equipped with electronic offset adjustment features that make its installation very user friendly. This powerful feature allows the users to install the AC-73-DH without mechanical offset adjustment and fine levelling. The advanced iSensor™ interface allows easy deployment using built-in hardware like compass as well as tilt, temperature and humidity sensors. The sensor can be powered from 9.5 to 18 VDC source with the advantage that its power input is insulated from the sensor’s electronic ground. This avoids ground loops and reduces noise induced through the power sup

General Characteristics Configurations: Full Scale Range: Power Power input: Supply Voltage: Consumption: Overvoltage Protection: Sensor Element Type: True Electro-mechanical Force Balance Accelerometer 165 dB (per bin rel. full range) 156 dB (per bin rel. full scale rms) 134 dB (0.02 – 50 Hz, integrated PSD) < 0.1 % < 0.5 % DC to 200 Hz 0.7 ±0.1 critical 0.0005 g / °C 200 ppm / °C 0 ±10 V differential (20 Vpp) < 0.001 % of full scale 2.5 to 20 V/g 100 ohms Dynamic Range: Nonlinearity: Cross Axis Sensitivity: Bandwidth: Damping: Offset Drift: Span Drift: Full Scale Output: Hysteresis:...