SR2 Transmetteur de pression Pressure transmitter C€ i Fonction Transmetteur destine aux applications industrielles necessitant des appareils robustes avec une bonne repetabilite et de faible cout. i Function Transmitter designed for industrial purposes requiring strong and low cost instruments with good repeatability. Caracteristiques Technical datas Element sensible Modele SR1 Modele SR2 Gamme relative Modele SR1 Modele SR2 sur demande Surpression Couche epaisse ceramique Al2O3 systeme piezoresistif 0...1 a 0...600 bar 0...0.1 to 0...60 bar -1...0 a -1...24 bar et echelles speciales Voir tableau au verso Sensing element SR1 model SR2 model Relative range SR1 model SR2 model on request Overpressure limit Thick strain gauge on ceramic Piezoresistive technology 0...1 to 0...600 bar 0...0.1 to 0...60 bar -1...0 to -1...24 bar and special scales Refer table backside Protection contre les inversions de polarites. Load Protection against reverse polarity. < 1% FS R(0)=(Usupply-8V)/0.02A RL>5KQ RL>10KQ Erreur globale max Non- linearite (BFSL) Deviation du zero Deviation thermique entre 0 et 80°C Derive annuelle Temps de reponse BoTtier Raccord process < 1% EM < ± 0.5% EM selon EN61298-2 < ± 0.5% pleine echelle typique < ± 0.8% EM 1% pleine echelle typique 2.5% pleine echelle max < 0.2% pleine echelle selon EN61298-2 < 4ms Acier inoxydable avec systeme de ventilation jusqu'a 16 bar Acier inoxydable 316L 1/4" GM en standard (autres : voir au verso) Max global error Non-linearity (BFSL) Deviation of zero < ± 0.5% FS according to EN61298-2 < ± 0.5% typical scale < ± 0.8% FS Temperature drift 1% typical scale between 0 and 80°C 2.5% max full scale Long term drift Response time Housing Process connection Partie en contact avec le fluide Inox 316L + ceramique + joint Viton membrane Inox 316L + joint Viton IP 65 EN 175301-803 pour cable 04 a 6 mm -25 a 85°C -25 a 85°C -25 a 85°C Modele SR1 Modele SR2 Protection Raccord electrique T° ambiante T° du fluide T° de stockage Valeur de repli ~ 3,7 mA ou ~ 25 a 27 mA En cas de rupture electrique de la cellule Emission et immunite selon normes EN 61326 groupe 1 - Classe B pour applications industrielles EMC 2004/108/CE PED 97/23/CE RoHS 2011/65/CE 20g (10...2000Hz) selon CEI 60068 40g/6ms - 100 chocs toutes directions Wetted parts SR1 model SR2 model Protection < 0.2% FS according to EN61298-2 < 4ms Stainless steel vented up to 16 bar 316L stainless steel 1/4" BSPM as standard (others : refer backside) 316L st.st. + ceramic + Viton gasket 316L st.st. diaphragm+ Viton gasket IP 65 Electrical connection EN 175301-803 for cable 04 to 6 mm Ambient T° Process T° Storage T° Substituted values 25 to 27 mA Conformites Vibrations Tenue aux chocs when strain gauge breaking Emission and Immunity Conformities Vibrations Shocks according to EN 61326 group 1 - Class B for industrial applications EMC 2004/108/CE PED 97/23/CE RoHS 2011/65/CE 20g (10...2000Hz) acc. to IEC60068 40g/6ms - 100 shocks any directions FC-SR2-FREN-29-01-2019 Subject to modifications due to technical advances / Soucieux d'ameliorer nos produits, nous nous reservons le droit de reviser sans preavis les caracteristiques de nos produits

SR2 Transmetteur de pression Pressure transmitter Encombrement (mm) / Dimensions (mm) Raccordement electrique / Electrical connection Tableau de gamme et surpression / Range and overpressure table GAMMES pour modele SR1 / SR1 model RANGES (bar)