i Fonction GS and GSX are 4 to 20mA programmable transmitters which can be use as electronic pressure switches for 1 or 2 thresholds monitoring or as a pressure indicator for the standard version of the product. j Technical data Sensing element Relative model (GSR, GSXR) Absolute model (GSA, GSXA) Max. pressure Power supply Output signal Load Max global error Temperature drift Resolution Reading rate Response time current range Substituted values Electrical connection Thick enamelled strain gauge on ceramic -1 to 400 bar (9 ranges available) 0 to 50 bar abs. (6 ranges available) Refer table backside 12 to 40 Vdc 4/20 mA + HART Protocol, 2 wires R(0)=(Usupply-12V)/22mA < 0.5% FS (acc. to IEC 61298-2) <100 ppm/K 16 bit 10 measurements per second 20 ms 3.8 to 20.5 mA ~ 3,6 mA (sensor short circuit) ~ 21 mA (gauge breaking) M12 connection (others on request) Display Display Decimal point Accuracy Temperature drift (according VDMA 24574-1 up to 24574-4) Programming Display Limit contact(s) Type (as a standard) Setting Settable values Failsafe function Galvanic insulation Mechanical data Display Housing Option : Process connection Wetted parts Protection Ambient T° Storage T° Options On request, the transmitter can be calibrated on customer range REGR25E REGR25F GSM12-3/5/8 GFM12-3/5/8-90 i Programming Programming 7 segments, 5 digits with LCD Height = 29 mm, red Mirror-inverted representation possible 3 positions available or absent ±0.2% of span ±1digit <100 ppm/K With sensitive touch keys Measuring value, unit of measurement, control menu 2x PNP or NPN (30 VDC, 200 mA) 1x PNP or NPN (30 VDC, 1000 mA) With sensitive touch keys Switch point(s) and hysteresis Switching delay from 0 to 999.9s Adjustable Switching output // measuring amplifier Polycarbonate (Makrolon) 330° rotatable PBT GF30 (GSR, GSA) Stainless steel (GSXR, GSXA) 316L stainless steel BSPM as standard (others : refer backside) 316L st.st. + ceramic + FKM (others : refer backside) IP 65 (when electrical connector is plugged) -20 to 80°C -20 to 85°C according to above limits. In that case the contact output will be inactive. Setting of a specific range and displaying REGR25D + alarm setting Straight connector 3/5/8 pins 90° connector 3/5/8 pins Sensitive touch keys by Hart ® protocol FC-GS-GSX-EN-12-04-2017 Subject to modifications due to technical advances / Soucieux d'ameliorer nos produits, nous nous reservons le droit de reviser sans preavis les caracteristiques de nos produits

GS/GSX Electronic Pressure Switch Connecteur suivant demande. Range and overpressure table CE DOCUMENT EST LA PROPRIÉTÉ DES RÉGULATEURS GEORGIN ET NE PEUT ÊTRE COMMUNIQUÉ SANS SON AUTORISATION THIS DRAWING IS PROPERTY OF REGULATEURS GEORGIN AND CANNOT BE REPRODUCTED WITHOUT GEORGIN AUTHORIZATION Scale Échelle TRANSMETTEUR DE Range limits are corresponding PRESSION Date :programmable value (LRV) and the higher programmable value (URV) which can be set. to the lower 21/12/16 SERIE GS - GSX Practically, span limits (between LRV and URV) will have to respect a minimum and a maximum proportion according...