Torque Motors KTY-R

Product catalog summary

Overview: The document provides technical specifications and features of the KTY-R torque motors, which are designed to complement the KTY-Q series by offering higher protection for demanding environments. These motors are housed in high-quality aluminum, achieving an IP65 protection rating, making them suitable for direct drive applications in challenging conditions.

Main Features:

High dynamics due to low inertia.
High overload capacity.
High positioning accuracy with high-resolution encoders and minimal play and friction.
Available in various configurations: hollow shaft, full shaft, blind hole shaft, loose flange, and shrink disk.
Increased permissible radial and axial forces upon request.
Optional safety brake (holding brake).

Technical Characteristics:

Motors are available in three different diameters and 3-4 lengths, covering torque ranges from 12 Nm to 240 Nm.
Rated speed and voltage vary across models, with options for 230V and 400V.
Protection class IP65 and insulation class F.

Technical Equipment:

Utilizes top-quality rare-earth magnets and optimized lamination.
Standardized flange dimensions according to DIN 42 677, with special flanges available on request.
Flange accuracy as per DIN 42 955.
Various shaft configurations available, including full shaft with/without feather key, hollow shaft, blind hole shaft, and more.

Optional Features:

Shaft sealing at the non-drive end, increasing dimension by 10 mm.
Loose flange and shrink disk options as per customer specifications.

Catalog excerpts

Torque Motoren KTY-R Torque Motors KTY-R

Open the catalog to page 1

Torque Motoren KTY-R Mit den eigengelagerten Synchron-Torque-Motoren KTY-R ergänzen wir die Baureihe KTY-Q auf sinnvolle Weise für Anwendungen, die eine höhere Schutzart verlangen. Durch die Verwendung von hochwertigen Aluminiumgehäusen erreichen die Motoren dieser Baureihe eine Schutzart von IP65. Damit sind anspruchsvolle und präzise Direktantriebslösungen auch unter schwierigen Umgebungsbedingungen realisierbar. Die Motorserie KTY-R steht in 3 verschiedenen Durchmessern in je 3-4 Baulängen zur Verfügung. Dabei wird der Drehmomentbereich von 12 Nm bis 240 Nm in sinnvollen Drehmoment- und Größenstufen...

Open the catalog to page 2

Optional: Abdichtung Welle B-seitig (Maß k verlängert sich um 10 mm) Optional: Shaft sealed at non-drive end (dimension k increases by 10 mm) Blockflansch nach DIN EN ISO 9409-1 oder nach Kundenvorgabe Loose flange in accordance with DIN EN ISO 9409-1 or as per customer specification Schrumpfscheibe nach Kundenvorgabe Shrink disk as per customer specification 1) mit Bremse MF / with MF brake 2) Hohlwelle / Hollow shaft Technische Ausstattung Hochwertige Selten-Erd-Magnete Optimierte Blechschnitte Schwingstärke R, auf Wunsch Schwingstärke S nach DIN VDE 0530-14 Flanschmaße genormt nach DIN 42...

Open the catalog to page 3

System prod ukte Product Focus ■ Stainless Steel Motors and Gearboxes ■ Integrated Servo Gear Motors GEORGII KOBOLD GmbH & Co. KG

Open the catalog to page 4

All GEORGII KOBOLD catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list