Terminal Blocks
52Pages

{{requestButtons}}

Catalog excerpts

Terminal Blocks - 2

Terminal Blocks >> Description >> with Screw Connections >> Feed-through terminals >> Separator terminals Combi-terminals Initiator terminals Distribution terminals Fuse terminals Earth connection terminals Pick-a-back terminals >> Railless feed-through terminals >> Accessories >> with Spring-cage Connections >> Feed-through terminals >> Earth connection terminals >> Accessories >> with IDC Fast Connection System >> Feed-through terminals >> Earth connection terminals >> Accessories

Open the catalog to page 2
Terminal Blocks - 3

About Us Control Units Panel Mount Jacks Bus Technology Enclosures Terminal Blocks Screw Connection Pedal Switches Terminal Blocks with Screw Connections Briefing Schlegel terminal blocks are standard terminals for industrial application, particularly suitable for electric machine control systems, switchgear and controlgear, distribution and measuring systems, as well as for the lift and equipment construction. The terminals are suitable for high and low voltage for DC and AC. They are featuring short assembly times and small dimensions. With a complete documentation of the production...

Open the catalog to page 3
Terminal Blocks - 4

rail. Moreover, once snapped onto the rail, the terminal feet are relieved from stress which prevents material fatigue. However, if individual terminals have to be exchanged, the end clamp bracket must be loosened and the adjacent terminals must be shifted slightly. But this disadvantage takes only effect on the small number of exchanged terminals whereas the specified advantages become effective in general. 2. Snap fitting of pre-assembled terminal blocks Important: Once the terminals are mounted onto the rail, the snap-fit terminal feet are relieved from stress preventing the plastics from...

Open the catalog to page 4
Terminal Blocks - 5

^SCHLEGEL) ELEKTROKONTAKT About Us Control Units Panel Mount Jacks Bus Technology Enclosures Terminal Blocks Pedal Switches Limit Switches Type Index^ Screw Connection "OSK - Original Schlegel Clamping System" On the screw-type terminals with wire protection bracket the conductors are pressed onto the basis of the conductive clamping body by the lower foot of the wire protection bracket which is fastened by a screw. This system is called the "OSK” system (Original Schlegel Clamping System), because it is unique in the terminal market. This construction ensures the so-called...

Open the catalog to page 5
Terminal Blocks - 6

This connection system features very quick and easy connection of the conductors, keeping them well in place. Screw Connection Type Index Limit Switches Pedal Switches Terminal Blocks Panel Mount Jacks Terminal Blocks with Flat-Plug Connections Briefing Particularly for the automotive industry, Schlegel also offer 4mm2terminals with 2 x 2 flat plug connections for 6.3mm insulating sleeves (type ref. IZZ4). top-hat rail N35 but snaps on its smaller variant N15. Accordingly, they are smaller in dimension, apart from their width. Miniature Terminals The miniature screw-type terminals for 2.5mm2...

Open the catalog to page 6
Terminal Blocks - 7

Terminal Blocks with Spring-Cage Connection For spring-cage terminals the conductor must be stripped before wiring. The optimal insulation stripping length must be observed as defined in the description of the relative terminals. The maximum connection space of the IFK spring-cage terminals enables quick wiring of solid and multiple conductors, even with wire end ferrules. The spring-cage terminal is opened by inserting a screwdriver in the appropriate square opening of the clamping body. Then the conductor is inserted in the adjacent round opening. When removing the screwdriver the...

Open the catalog to page 7
Terminal Blocks - 8

IDC Shift-Clip Connection On the ISK series the conductor connection of 0.25 to 2.5 mm2 is made by the patented insulation displacement contact (IDC cutting technology). The conductor is inserted in a shift-clip connection. After closing the shift-clip closure with a screwdriver, two convergent metal edges of the clamping body cut through the conductor insulation to establish a conductive contact. For disconnection and removal of the conductor the shift-clip closure must be opened. When installing these terminals, it should be noted that they are not equipped with interlocking pins. They...

Open the catalog to page 8
Terminal Blocks - 9

screw connection, slotted screw About Us Control Units Panel Mount Jacks mounting method terminal width Connection type screw connection, slotted screw screw connection, slotted screw tightening torque operating temperature pollution degree overvoltage category material group tightening torque connection range (solid wire) rated voltage rated current connection range (solid wire) rated voltage rated current identification labels Pedal Switches Terminal Blocks rated current rated voltage Quick-assembly Terminal Blocks multiple wire Screw Connection Quick-assembly Terminal Blocks rated cross...

Open the catalog to page 9
Terminal Blocks - 10

Fixblock ■ screw connection, slotted screw Type Index Limit Switches Pedal Switches Terminal Blocks Enclosures Bus Technology Panel Mount Jacks Control Units About Us 1000 V max. when using a partition wall IW16 between the terminals

Open the catalog to page 10
Terminal Blocks - 11

screw connection, slotted screw About Us Control Units Panel Mount Jacks mounting method terminal width Connection type screw connection, hexagon socket/slotted screw screw connection, hexagon nut tightening torque operating temperature pollution degree overvoltage category material group tightening torque Pedal Switches Terminal Blocks rated current rated voltage Quick-assembly Terminal Blocks multiple wire Screw Connection Quick-assembly Terminal Blocks rated cross section connection range (solid wire) rated voltage rated current rated impulse voltage stripping length data acc. to UL1059...

Open the catalog to page 11
Terminal Blocks - 12

Fixblock ■ screw connection, slotted screw Quick-assembly Terminal Blocks |240 mm2 240 mm2 |240mm2 Top hat rail N35, EN60715 TH35 58 mm screw connection, hexagon nut for bars or cable lugs |14 Nm ~ Quick-assembly Terminal Blocks 4 mm2 Type Index Limit Switches Pedal Switches Terminal Blocks Enclosures Bus Technology Panel Mount Jacks Control Units About Us

Open the catalog to page 12
Terminal Blocks - 13

screw connection, hexagon nut About Us Control Units Panel Mount Jacks mounting method terminal width Connection type screw connection, slotted screw screw connection, slotted screw tightening torque operating temperature pollution degree overvoltage category material group connection range (solid wire) rated voltage rated current identification labels Terminal Blocks rated current rated voltage Separator Terminals multiple wire Screw Connection Separator Terminals rated cross section rated impulse voltage stripping length data acc. to UL1059 tightening torque Pedal Switches connection range...

Open the catalog to page 13

All Georg Schlegel GmbH & Co. KG catalogs and technical brochures

  1. FRT Connect

    12 Pages

  2. proboxx

    28 Pages

  3. RFID

    24 Pages

  4. Rondex-Juwel

    24 Pages

  5. mYnitron

    16 Pages

  6. Limit Switches

    28 Pages

  7. Control Units

    10 Pages

  8. Enclosures

    30 Pages

  9. Quartron-Juwel

    20 Pages

  10. Oktron-Juwel

    18 Pages

  11. RVA

    10 Pages

  12. Quartex

    16 Pages

  13. DUX-Basic

    22 Pages

  14. Rondex-M

    16 Pages

  15. Rondex

    16 Pages

  16. RX-Juwel

    14 Pages

  17. Shortron M12

    10 Pages

  18. Shortron

    32 Pages

  19. Quartron

    18 Pages

  20. Oktron-R

    18 Pages

  21. Oktron

    20 Pages