T R AV E R S E S P O O L E R S
7Pages

SAHM TRAVERSE SPOOLERS Subject to change without notice SAHM TRAVERSE SPOOLERS Georg Sahm GmbH & Co. KG Maschinenfabrik http://www .sahmwinder.de E-mail: info@sahmwinder.de WINDERS+SYSTEMS

SAHM TRAVERSE SPOOLERS

Your advantages The SAHM Traverse Spoolers product group features: Easy realization of customer requirements High flexibility for winding all kinds of tapes Improved efficiency due to high material lengths Increased winder service life due to reduced downtimes

Drive: Spindle: frequency-driven Traverse Mechanism: servo-driven Maximum winding 450 m/min speed: Traverse length: adjustable up to package diameter: Tube inside diameter: 29,8, 76,2, or 30 to 1250 cN Maximum winding volume for tubes with 76,2 mm inside diameter: 30 dm3 Combination of all maximum values is not possible Cable insulations, safety strips in banknotes, ornamental tapes, adhesive tapes, rubber tapes for the automotive, dental silk, tear tapes for packaging Decreasing or increasing yarn tension with increasing package diameter Pneumatically mandrel Optimum speed adaptation by...

SAHM 411 E layout plan (example) Vertical yarn supply for material widths up to 30 mm Optional left or right yarn supply Overall length of the installation = (n / 3) x 750 n = number of winding heads (calculation is with fully equipped vertical rows) NOTE! The following installation variants are possible: a) single faced (left or right version) b) two rows / back-to-back c) two rows / face-to-face SAHM 411 E layout plan (example) Horizontal yarn supply for material widths up to 12 mm Optional left or right yarn supply Overall length of the installation = (n / 3) x 685 n = number of winding...

SAHM TRAVERSE SPOOLERS

Continuous operation of production lines requires greater lengths. This can be achieved with our traverse winders. Depending on the physical properties of the materials, many thousand meters can now be traverse wound on a tube or spool.