Material Specifications Overview:
This document provides detailed specifications for various materials under the M-Tech® S brand, which are not available for sale as semifinished products. The materials covered include aluminum, aluminum alloys, ferritic stainless steel, non-rusting steel, cold-rolled steel strip, cold-rolled spring band steel, and brass.

1. Aluminum and Aluminum Alloys:
- Aluminum (EN AW-Al99,5): Hardness of HB 35, tensile strength between 150-190 N/mm², available in thicknesses of 0.050 mm, 0.075 mm, and 0.100 mm with a dimension of 610 mm and thickness deviation of +/- 0.0050 mm to 0.0075 mm.
- Aluminum Alloy (EN AW-AlMg3): Hardness of HV 65, tensile strength between 220-270 N/mm², available in various thicknesses and dimensions, with thickness deviations ranging from 0.0050 mm to 0.1100 mm.

2. Stainless Steel:
- Ferritic Stainless Steel (X6Cr17): Hardness between HV 190-380, tensile strength between 530-730 N/mm², available in thicknesses from 0.500 mm to 3.000 mm with dimensions of 1000 × 2000 mm.
- Non-Rusting Steel (X5CrNi18-10): Hardness between HV 190-380, tensile strength between 700-1400 N/mm², available in various thicknesses and dimensions, with thickness deviations ranging from 0.0010 mm to 0.1300 mm.

3. Cold-Rolled Steel Strip:
- DC01 + C590: Hardness between HV 185-225, tensile strength between 590-740 N/mm², available in thicknesses from 0.025 mm to 1.000 mm with various dimensions.
- DC04: Hardness of HB 50, tensile strength between 270-350 N/mm², available in thicknesses from 0.500 mm to 3.000 mm with dimensions of 1000 × 2000 mm.

4. Cold-Rolled Spring Band Steel:
- C100S and C75S: Hardness of HV 325 and HV 390 respectively, with maximum tensile strengths of 1200 N/mm² and 1800 N/mm², available in various thicknesses and dimensions.

5. Brass:
- CuZn37: Hardness between HB 85-140, tensile strength between 350-500 N/mm², available in thicknesses from 0.010 mm to 3.000 mm with various dimensions.

Additional Notes:
- Hardness is measured using Vickers (HV) and Brinell (HB) tests.
- Dimensional data is provided for both panel dimensions and strip width.