• Machine Tools Clamping Systems Precision down to the last tooth. Bandsaw blade milling machine ► Bandsaw blade production > Steering rack production

FS 2000 The concept of the FS-2000 is based on decades of expertise in manufacturing special purpose milling machines. The machine is equipped with a state of the art Siemens SINUMERIK 802D sl control as well as Siemens servo drive units. The robust machine is totally enclosed and is used by bandsaw blade manufacturers for milling the teeth in both carbon and bimetal bandsaw blades of up to 100 mm band width and within the milling range of 32 to 0.5 teeth per inch. The FS-2000 special milling machine offers fully automatic feed-through milling, short cycle times, optimal tooth geometry and cutting...

automatic work process. Coolant and swarf removal Bandsaw blades Both emulsion as well as oil can be used as cooling lubricants. The chips are remo- ved through the coolant. A magnetic roller takes over the cleaning.The chips are removed via a belt conveyor into a chip Manufacturers worldwide produce their different bandsaw blades on Kesei bandsaw blade milling machines. These machines offer almost unlimited possibili- ties for the tooth profile milling processes and the band sizes they have been desi- gned for. Bimetal bands as well as carbon bands can be milled. If you are working with a special...

Machine Tools Clamping Systems Milling head F 350, modified transmission with increased power drive Milling arbor Min. diameter of milling cutter Max. diameter of milling cutter 310 mm (depending on taper angle milling cutter / cutting angle saw) Tool width For cutter design concepts contact Rotational axis Cutting angle swivel range up to 20° Clamping system Hydraulic high pressure clamping unit with band leveling device Clamping width Band guide and burr plate Adjustable In vertical and horizontal direction Electrically operated burr plate drive Coolant and swarf removal Cooling lubricant Filling...