*mydirectindustry

EM 3

EM 3

Product catalog summary

Overview: The Kesel EM-3 is a gear deburring machine designed for the deburring and chamfering of various gear types, including internal, external, bevel, and spiral bevel gears. It automates the process after programming the RPM and number of revolutions.

Specifications:

Workpiece Data: Clamping-table diameter is 300 mm, with a maximum workpiece diameter of 400 mm. The table features infinitely variable RPM control and pneumatic workpiece clamping.
Control System: Utilizes a Siemens SIMATIC OP 77 digital control with a graphic-based display for process visualization and data input via a membrane-sealed keypad.
Machining: Equipped with a pneumatic tool operating at 6 bar pressure.
Electrical Connection: Requires a 16 A fuse and operates at a nominal voltage of 230 V, 50 Hz.
Suction Unit: Provides a suction output of 1,700 m³/h.
Dimensions and Weight: Installation dimensions are 1,900 mm in length, 1,500 mm in depth, and 2,200 mm in height, with a machine weight of approximately 400 kg.
Options: Can accommodate up to three grinding tools, with additional accessories available upon request.

Clamping Tools: The machine uses a specially designed three-jaw chuck for clamping both internal and external gears. Customer-specific workpieces can be accommodated with appropriate adapters.

Operator Panel: Features a 4.5-inch display for clear readings and process representation as a bar diagram.

Catalog excerpts

Efficiency with each turn. EM 3 Gear deburring machine > Bandsaw blade production Steering rack production Rack production ► Gear machining > Clamping tools

Open the catalog to page 1

EM 3 The Kesel EM-3 gear deburring machine has been developed for deburring and/or chamfering of both internal and external gears, bevel gears, spiral bevel gears and similar shaped components. After programming the RPM and number of revolutions you put the gear in place, shut the safety door and the clamping and deburring cycle starts automatically. Workpieces are clamped with a specially designed three jaw chuck which can clamp both internal and external gears. Clamping unit Operator Panel The workpieces are clamped with a specially designed three jaw chuck which can clamp both internal and...

Open the catalog to page 2

Up to three grinding or brushing tools may be used to deburr gears of up to 400 mm in diameter.

Open the catalog to page 3

Specification EM 3 Work piece data Clamping-table diameter 300 mm Work piece diameter max. 400 mm Table Infinitely variable r.p.m. control Pneumatic work piece clamping Control Digital-control Siemens SIMATIC OP 77 Machining Pneumatic tool with 6 bar Electrical connection Fuse 16 A Suction unit Suction output 1,700 m3/h Dimensions and weight Installation dimensions length 1,900 x depth 1,500 x height 2,200 mm Machine weight approx. 400 kg Options Three grinding tools max. Additional accessories upon request

Open the catalog to page 4

EM 3

EM 3

Catalog excerpts

All GEORG KESEL catalogs and technical brochures