*mydirectindustry

Model 1000SP

Product catalog summary

General Specifications
The Model 1000 SP is a humidity and temperature calibrator with traceability to NIST under ISO 17025. It operates in ambient conditions of 18°C to 28°C and up to 80% RH, with storage conditions ranging from -20°C to 50°C and 0% to 95% RH (non-condensing). The device is suitable for altitudes up to 2000 meters.

Controlled Range
Temperature control ranges from 5°C to 55°C. Humidity control varies with temperature, e.g., 5% to 95% RH at 18°C and 5% to 50% RH at 50°C.

Calibration System Accuracy
Temperature accuracy is ±0.12°C or better, typically ±0.10°C. Humidity accuracy is ±1.00% RH or better, typically ±0.80% RH. The system uses a PID controller.

Uniformity and Stability
Temperature uniformity is 0.10°C or better, and humidity uniformity is 0.30% RH or better at 18°C to 28°C. Stability is 0.05°C for temperature and 0.15% RH for humidity.

Ramp/Soak Rate of Change
Temperature changes at 1.50°C/min (high to low) and 3.00°C/min (low to high). Humidity changes at 5.00% RH/min (high to low) and 10.00% RH/min (low to high).

Resolution
Display resolution for temperature and humidity is 0.01°C and 0.01% RH, respectively. Dew point is calculated with a resolution of 0.01°C.

Consumables
The water reservoir holds 50 ml of distilled water, with a refill period of 15 days to 1 month. A molecular sieve desiccant is used, with replacement frequency depending on workload.

Recalibration Frequency
Recalibration is recommended once per year, depending on user uncertainty requirements.

Mechanical Specifications
The generator dimensions are 46.00 cm x 31.50 cm x 15.00 cm, with a weight of 8.5 kg. The chamber dimensions are 19.50 cm x 13.00 cm x 7.45 cm, with a working volume of 1.5 liters.

Power Supply
The device requires a 12 Volt DC power supply at 1A.

Accessories
Includes a square 3-port door, desiccant canister, fill syringe, and various grommets. Calibration documents are provided.

Contact Information
For purchasing and inquiries, contact Geo Calibration Inc. at [email protected] or visit www.GeoCalibration.com.

Catalog excerpts

Model 1000 SP HUMIDIT Y AND TEMPERATURE CALIBRATORS

Open the catalog to page 1

GENERAL SPECIFICATIONS CALIBRATION OPERATING AMBIENT CONDITIONS STORAGE CONDITIONS ALTITUDE Charged Separately / Optional CONTROLLER TYPE UNIFORMITY TEMPERATURE CALIBRATION SYSTEM ACCURACY CONTROLLED RANGE Temperature RAMP / SOAK RATE OF CHANGE *Depends on ambient conditions Humidity WARM-UP PERIOD Ambient Condition CONSUMABLES RESERVOIR SPILL RESISTANT Distilled Water Only 15 Days to 1 Month (Typical) * Depends on Usage Floating Ball Molecular Sieve When Indicating Desiccant is 3/4 Used REPLACEMENT FREQUENCY Depends Entirely on User Workload Back Side Mounted FASTENER RECALIBRATION REQUIRED...

Open the catalog to page 2

MECHANICAL Measurement Type Measurement Type Measurement Type WORKING DIMENSIONS AND VOLUME CHAMBER DIMENSIONS GENERATOR DIMENSIONS 1.5 Liter Effective Working Volume Metric Unit Only POWER SUPPLY FOR EXTERNAL USE Power Supply STANDARD PORT QUANTITY Availability: 3 Ports Probe Range Temperature PROBE ANALOG OUTPUTS AVAILABLE Actual Unit Range Ordering Information Standard Supply Package Square 3-Port Door Desiccant Canister Fill Syringe Mains Power Cord Calibration Documents Accessories Doors Connector Type Part Number Port Type Part Number Port Type Part Number Port Quantity Round Grommets Part...

Open the catalog to page 3

Proudly Made in the USA 2190 Smithtown Ave, Ronkonkoma NY 11779, USA [email protected] 2190 Smithtown Ave, E: [email protected] W: www.GeoCalibration.com T: (631) 471 - 6157 www.GeoCalibration.com Ronkonkoma NY 11779 © 2019 GEO Calibration Inc. All rights reserved.

Open the catalog to page 4

Model 1000SP

Model 1000SP

Catalog excerpts

All GEO Calibration Inc. catalogs and technical brochures