Pegasus P1800 Range

Product catalog summary

Overview: The Genvolt Pegasus P1800 is a high voltage power supply designed for laboratory and industrial use. It is available in a 19-inch rack format and offers a range of output voltages and currents, with options for remote control and additional outputs.

Specifications:

Input: 230VAC (198 - 264VAC), 45 - 60Hz, Power factor > 0.95.
Output: Models range from 10kV to 120kV with corresponding current outputs from 180mA to 15mA. Output polarity can be specified as negative or positive.
Regulation: Load regulation and line regulation are both within 100ppm of maximum rated output voltage.
Ripple and Stability: Ripple is 0.1% peak to peak, with stability not exceeding 0.04% per hour after a ½ hour settling period.
Temperature Coefficient: Typically not more than 100ppm per °C.
Protection: Includes trip for excessive sparking, current limit for overload protection, and primary over-current protection.

Control Interface:

Front Panel: Includes LED indicators for mains power, high voltage enable, constant current/voltage, system status, fan operation, and more.
Back Panel: Features connectors for signal display, remote control, HV output, and mains input.
Remote Control: Optional interface via Harting or D-Sub connectors, with custom control panels available.

Environmental and Mechanical Specifications:

Operating Temperature: 0 to 35°C.
Storage Temperature: 0 to 60°C.
Humidity: Operating at 30% to 80%, storage not above 95%.
Weight and Dimensions: Approximately 35kg for 120kV model, standard 19” chassis, 3U high, 580mm deep.

Safety: The power supply contains hazardous voltages and should only be handled by trained personnel. The area should be clean and dry, and a secure Earth connection is essential.

Catalog excerpts

Genvolt design, develop and manufacture a wide range of high voltage power supply systems 1800W 19'' rack 3U power supply for general purpose Specification Summary DC High Voltage Power Supplies suitable for laboratory and industrial use. Standard remote control is by analogue signals. Should other controls be preferred please discuss this with our technical staff. Available in a standard 19-inch rack. Reduced weight and ease of serviceability is ensured, as the supplies are air insulated below 20kV. The option of grid and filament outputs is available, please contact the factory for more information. Capacitor Charging Option: The Pegasus range can be adapted to suit capacitor charging applications at low to moderate PRF. Input specifications Optional outputs Isolated grid output available up to 2000V at 10mA Isolated filament available up to 10V at 10A Protection • A trip occurs after excessive sparking or the occurrence of an error. The counter in the circuit limits the spark rate. • Current limit provides overload and short circuit protection. • Primary over-current protection is provided by the inverter Genvolt Ltd, New Road, Highley, Bridgnorth, Shropshire, WV16 6NN, UK. T: +44 (0)1746 862555 F : +44 (0)1746 862666 E : [email protected] W :www.genvolt.co.uk Registered in England and Wales N° 8087238

Open the catalog to page 1

Genvolt design, develop and manufacture a wide range of high voltage power supply systems Control Interface Remote control interface (optional) The Pegasus P1800 power supplies can be controlled by connecting an external control interface to the Harting connector or the D-Sub connector. Genvolt can also supply specially-designed control panels for customer requirements. Control panel: LED legend MAINS Circuit breaker HV ENABLE HV ON CONST MA CONST HV CONTACTOR SUM ERROR FAN 1 FAN 2 FAN 3 PFC1 IOG PFC2 IOG PFC1 EN PEC2 EN INV1 OC INV2 OC EM. STOP DOOR THERMAL 1 THERMAL 2 LVPSU Back panel: Description...

Open the catalog to page 2

Please specify RS232 or IEEE 488 requirements when ordering. 0 to 35°C 0 to 60°C Operating at 30% to 80%. Do not store the unit at above 95% humidity. Mechanical specifications Operating temperature Storage temperature Relative humidity Weight Dimensions Approx. 35kg for 120kV. Depends on output voltage. Standard 19" format chassis 3U high, 580mm deep excluding such back panel furniture as connectors, earth stud etc. Power input connector HV output connector Control interface connector Neutrik NAC3FCA power inlet Modified shell size 19 TNM female socket 40 pin Harting connector or 37 way D-Sub...

Open the catalog to page 3

Genvolt design, develop and manufacture a wide range of high voltage power supply systems Genvolt Ltd, New Road, Highley, Bridgnorth, Shropshire, WV16 6NN, UK. T: +44 (0)1746 862555 F : +44 (0)1746 862666 E : [email protected] W :www.genvolt.co.uk Registered in England and Wales N° 8087238

Open the catalog to page 4

Genvolt high voltage power supplies Genvolt design, develop and manufacture a wide range of high voltage power supply systems For requirements other than those specified, please do not hesitate to contact the factory. Pegasus P1800 control panel: Genvolt Ltd, New Road, Highley, Bridgnorth, Shropshire, WV16 6NN, UK. T: +44 (0)1746 862555 F : +44 (0)1746 862666 E : [email protected] W:www.genvolt.co.uk Registered in England and Wales Nº 8087238

Open the catalog to page 5

Pegasus P1800 Range

Pegasus P1800 Range

Catalog excerpts

All Genvolt catalogs and technical brochures