AF01 Model

Product catalog summary

Overview: The AF01 model is a high voltage power supply designed by Genvolt for use in air and oil purification systems. It offers both single and dual output options with a variety of output voltages. The system is protected against overload, short circuits, and sparks, and can operate off-load without voltage changes.

Specifications:

Input Voltage Range: 115VAC (105 - 125VAC) or 220VAC (200 - 240VAC)
Input Current: Less than 400mA at 220VAC
Output Voltage Options: Ranges from 7kV/3.5kV to 12kV/6kV for Ionizer/Collector
Output Power: Options of 20W, 30W, 40W, 50W
Load and Line Regulation: Less than 0.1%
Temperature Drift: Less than 400ppm/°C under 55°C
Voltage Ripple: Less than 0.3% at full load

Circuit Protection:

Output current is limited to 2.5 times the rated current during a short circuit.
In case of a spark, the power supply shuts off for 0.35 seconds and then restarts automatically.

Environmental and Mechanical Details:

Operating Temperature: 0 to 55°C
Storage Temperature: -20 to 80°C
Dimensions: 200mm x 80mm x 40mm
Weight: 0.6kg
Enclosure Material: Aluminium alloy

Connectors and Wiring:

Power Input Connector: Includes mains input (Live, Neutral, Earth) and relay contacts (Common, Normally Closed, Normally Open).
HV Output Connector: Provides full HV output for Ionizer and half HV output for Collector.
Wiring Diagram: Includes three voltage-free relay contacts for status indication.

Additional Information: For specifications beyond those listed, contact Genvolt directly. Note that design improvements may alter specifications.

Catalog excerpts

Genvolt design, develop and manufacture a wide range of high voltage power supply systems Air cleaning HV power supply Specification Summary Input voltage range Input current Load regulation The AF01 range of power supplies are specifically designed for application in air and oil purification systems. They are available with either single or dual outputs, and with a wide range of output voltages. The power supplies are protected from overload, short circuit and sparks. They are able to be used off-load without any changes in output voltage. Input specifications 115VAC (105 - 125VAC) 220VAC (200 - 240VAC) Less than 400mA at 220VAC Output voltage Genvolt Ltd, New Road, Highley, Bridgnorth, Shropshire, WV16 6NN, UK. T: +44(0)1746 862555 F:+44(0)1746 862666 E: [email protected] W: www.genvolt.co.uk Registered in England and Wales N° 8087238

Open the catalog to page 1

Genvolt design, develop and manufacture a wide range of high voltage power supply systems Definition Live Mains input Neutral Earth Common Relay contacts Normally closed Normally open HV output connector Legend Definition IONIZER Full HV output COLLECTOR Half HV output AF01-220-P50-12D Model Input voltage Output polarity Output power Power curve Single/Dual output Output voltage Output current versus voltage curve For requirements other than those specified, please do not hesitate to contact the factory. Please note that design improvements may lead to specification changes. Genvolt Ltd, New...

Open the catalog to page 2

Genvolt high voltage power supplies Genvolt design, develop and manufacture a wide range of high voltage power supply systems AF01 wiring diagram Three voltage free relay contacts are available on the connector (pinl, 2 and 3). These may be used for status indication. Examples are shown below. Example one: Input connection Example two: Signal lamp connection A220V 5Wlarrp is ronneded. the lamp is ON when the psu is operated and IS OFF when the psu is off or in fault condition -0-1 Example three: Signal lamp connection An eon lamp isconnected , the lamp is OFF when the psu is operated and is ON...

Open the catalog to page 3

AF01 Model

AF01 Model

Catalog excerpts

All Genvolt catalogs and technical brochures