ITS
2Pages

Temperature Sensors Temperature Sensors Type ITS PPSU Inline Temperature Sensor ITS the new inline temperature sensor from AVS-Römer Inline temperature sensor for measuring temperature of fluids and gaseous medium. The ceramic temperature sensor combined with the proven ELSA pushin connector made from PPSU is mainly used in the food industries. Push-in Fittings Other features: • fast response time • minimal dead space • materials and constructional design especially optimised for food applications Variations / options: • other hose connections • other materials for seal CHARACTERISTICS GENERAL Constructional design Product name Product type Nominal diameter Connection Ambient temperature Medium temperature Medium viscosity Thermal time constant Body material Sensor housing material O-ring material Approval Ceramic temperature measuring cell Temperature sensor ITS-958P3-... 2.5 DN or DN 4 ELSA push-in connectors for pipe/tube OD 4 or OD 6 0 °C to +60 °C 0 °C to +130 °C up to approx. 35 mm2/ s <2 s (water) PPSU (KTW-approved, NSF-certified) Al2O3 FKM (FDA-compliant) or EPDM (FDA compliant, KTW autorized, NSF certified) NSF/ANSI 169 PNEUMATIC - HYDRAULIC PN 20 Technical vacuum up to maximum allowable operating pressure OP in accordance with the specification table Kv-value in accordance with the specification table Gases or fluidss which do not corrode the materials specified Nominal pressure Pressure range Flow rate Medium ELECTRIC Electrical Connection 2-pin PVC ribbon cable AWG 24, 0.75 m, UL AWM style 2651, 300 V, 105 °C, strand ends pre-tinned Caution! PPSU should not be used in contact with aromatic hydrocarbons, oxidising acids, acetone, chlorinated hydrocarbons, ethers or ketones! Also, PPSU should not be placed directly in contact with anaerobic adhesives! AVS Römer . www.avs-roemer.de . info@avs-roemer.de . +49 8552 407

Temperature Sensors Temperature Sensor, Type ITS Illustration Home Product group PN Max. Allow. OP at ambient temp. 20 Tmin 0 °C, Tmax +60 °C Nominal Allow. OP [bar] at Kv-value Senfor resistance tube DN medium temp. water L6 sorNTC at 25 °C OD [l/min] type Pt100 at 0 °C 20 °C 100 °C135 °C Plastic PPSU R Tolerance B Sealant B value R25/85 Toler- material ance FKM (FDAcompliant) EPDM (FDAcompliant) FKM (FDAcompliant) EPDM (FDAcompliant) FKM (FDAcompliant) EPDM (FDAcompliant) FKM (FDAcompliant) EPDM (FDAcompliant) FKM (FDAcompliant) EPDM (FDAcompliant) FKM (FDAcompliant) EPDM (FDAcompliant)...