GTH-5519 Telehandlers

Product catalog summary

Specifications:
The Genie® GTH™-5519 is a telehandler with a maximum lift height of 18 ft 10 in (5.74 m) and a maximum forward reach of 11 ft 3 in (3.43 m). It has a stowed height of 6 ft 6 in (1.98 m) and a stowed length of 12 ft 3 in (3.73 m) without forks. The width is 5 ft 11 in (1.80 m), and the wheelbase is 7 ft 6 in (2.29 m). Ground clearance at the center is 1 ft 2 in (0.36 m) and at the axle is 10 in (0.25 m). The fork cross-section measures 1.6 × 4 in (40 × 100 mm).

Productivity:
The telehandler has a maximum lift capacity of 5,500 lb (2,495 kg), with a lift capacity at maximum height of 4,400 lb (1,996 kg) and at maximum reach of 1,900 lb (862 kg). It can drive at speeds up to 15 mph (24 km/h) and has a drawbar pull of 7,716 lb (3,500 kg). The turning radius is 11 ft (3.35 m), with an auxiliary hydraulic flow of 17 gpm (64 Ipm) and pressure of 3,918 psi (270 bar). Standard tire size is 12 × 16.5 in, 10 ply.

Power:
Powered by a Deutz TCD 2.9 engine, the telehandler features a 12 V electrical system with a 95 amp alternator and a 720 CCA battery. The hydraulic tank capacity is 18.5 gal (70 L), with a total hydraulic system capacity of 31.7 gal (120 L). The fuel tank holds 15.8 gal (59.8 L).

Weight:
The unit weighs 10,360 lb (4,700 kg).

Standards:
Complies with ANSI A92.20 and CSA B354.6 standards for telehandlers.

Attachments and Options:
Various attachments are available, including universal skid steer adapters, QA buckets, carriages, forks, and truss booms. Options for cab configurations include open or closed cabs with heater or AC. Additional features include alarms, fire extinguishers, seat belts, and telematics systems.

Chassis and Boom:
Features include a 74 hp side-mounted engine, telematics readiness, multiple tire options, and a 3-mode steering system. The boom includes a manual or hydraulic Quick-Attach system, auxiliary hydraulic circuit, and self-leveling fork frame.

Warranty and Safety:
The document emphasizes the importance of following the Operator’s Manual for safe use and notes that product specifications may change without notice. The standard written warranty applies to the equipment.

Catalog excerpts

Specifications Range of motion GTH-5519 Maximum lift height Maximum forward reach Reach at maximum height Length, stowed (without forks) © Ground clearance, center © Ground clearance, axle Fork cross section Maximum lift capacity Lift capacity at maximum height Lift capacity at maximum reach Drive speed Turning radius, outside (4WS) Auxiliary hydraulic flow Auxiliary hydraulic pressure Tires, standard size Power source Electrical system voltage Hydraulic tank capacity Hydraulic system capacity (w/tank) Fuel tank capacity (1) Weight will vary depending on options and/or country standards. (2) Load ratings vary depending on attachment.

Open the catalog to page 1

Genie® GTH™-5519SKU: Standard Model • GTH55191AF0112: GTH-5519, 74 hp, Open cab ftl 74 hp, Deutz TCD 2.9, T4f, Side-mounted engine Lojack stolen vehicle recovery system Genie manual Quick-Attach (QA) system E Genie hydraulic Quick-Attach (QA) system Bo Auxiliary hydraulic circuit (18.5 GPM) *Choose from either Open cab or Closed cab/ Heater only or AC and Heater Product specifications are subject to change without notice or obligation. Photographs and/or drawings herein are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on proper equipment use. Failure...

Open the catalog to page 2

GTH-5519 Telehandlers

GTH-5519 Telehandlers

Catalog excerpts

All Genie catalogs and technical brochures