GX-GENESI XBAR Blue Line Internal Controller with Develop your custom solution Illuminator Features : - Project achieved by internal resources and Genesi skills; Designed for machine vision applications with linear or matrix cameras; - Fast controller which allows to have the following modes: continuous use,semi-continuous use,strobe (PNP, NPN), analog regulation. - Microcontroller to monitor the pulse duration and the maximum temperature; - Model GX with 5° Lens or transparent covers; - Model GXML designed with interchangeable lens position to achieve 4° to 45° light beam; - Model GXB for backlight function with satin, trasparent or opaline covers; - Powerful and Fast strobe mode with energy buffering and strobe duration control, min. pulse from 1 ps;

Part Number Examples:GX14-6K Power bar 4 Driving Modes 14 cm White 6000K 5° Lens cover 1080/3000Lm 0,3/0,8A 7,2/20W 20cm cable M12 M 5P GXB78-850 Power bar & backlight 4 Driving Modes 78 cm IR 850nm Opaline satin cover 2,5/7,2A 60/173W 20cm cable M12 M 5P GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www. aenesi-elettronica. com ®All Rights Reserved GENESI ELETTRONICA - GX - GEN ESI XBAR

In this mode ^ Tonmax = 60 s - Dtmax = 50% it is possible to connect PIN4 directly to +24 V or PIN2 to GND. To use it in continuous mode with DTmax from 51% to 100%: it is necessary to use the heat sink or forced ventilation. ANALOG REGULATION USE 100% Connector PIN5 from 1 to 10 V can adjust the power from 10% to 100%. Microcontroller temperature protection ^ at 80°the PCB enables the protection and restores the functioning at T<60°. Genesi LUX* GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www aenesi-elettronica. com ®All...

BEAM ANGLES AND COVERS GX - BASE CONTINUOUS SEMI-CONTINUOUS STROBE Design & Production Made in Italy GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www aenesi-elettronica. com ®All Rights Reserved GENESI ELETTRONICA - GX - GEN ESI XBAR

LIGHT PROJECTION GXML GXML30-6K HOW TO CHANGE THE LENS POSITION Remove this to change lens - cover Do not remove the plug on the cable side GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www. aenesi-elettronica. com ®All Rights Reserved GENESI ELETTRONICA - GX - GEN ESI XBAR

Satin Polycarbonate CONTINUOUS SEMI-CONTINUOUS STROBE CONTINUOUS SEMI-CONTINUOUS STROBE CONTINUOUS SEMI-CONTINUOUS STROBE ACCESSORIES CODE GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www aenesi-elettronica. com ®All Rights Reserved GENESI ELETTRONICA - GX - GEN ESI XBAR

DEVELOP YOUR CUSTOM PRODUCT WITH OUR R&D TEAMs_>LED STATUS Mode The indicated IP protection degree is guaranteed only if the product is positioned downward STANDARDS -Electrical device exclusively for professional use. Installation can be done by qualified personnel only. -In case of power supply wire damage, its replacement has to be done at the head office exclusively. Warranty loss in case of inappropriate use and tampering. Design & Production Made in Italy GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www. aenesi-elettronica....