Blue Line Internal Controller with 4 driving modes

GP23-6K-T Power bar 4 Driving Modes 23 cm White 6000K Transparent cover 2160/14400Lm 0,6/4A 14/96W 20cm cable M12 M 5P GP36-365-45T Power bar 4 Driving Modes 36 cm UV365nm 45° lens + transparent Cover 0,9/2,7A 22/65W 20cm cable M12 M 5P GP102-850-OP Power bar & backlight 4 Driving Modes 102 cm IR 850nm Opaline cover 1/3,2A 24/77W 20cm cable M12 M 5P

OPERATING MODE it is possible to connect PIN4 directly to +24 V or PIN2 to GND In this mode ^ Tonmax = 60 s - Dtmax = 50% it is possible to connect PIN4 directly to +24 V or PIN2 to GND. To use it in continuous mode with DTmax from 51% to 100%: it is necessary to use the heat sink or forced ventilation. In this mode ^ Tonmax = 10 ms - Dtmax = 10% AUTO-SWITCH in continuous use. ANALOG REGULATION USE 100% Connector PIN5 from 1 to 10 V can adjust the power from 10% to 100%. 400% STROBE USE POWER can be reached only from WHITE / VISIBLE / NIR LEDS, for other wavelengths check the power table at page...

For 3D mechanical drawing requests - info@genesi-lux. itLIGHT PROJECTION 90° Powers related to the white colour homogeneity: ± 5% Genesi LUX* GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www aenesi-elettronica. com ®All Rights Reserved GENESI ELETTRONICA - GP - GENESI POWER BAR

ACCESSORIES CODE M12 connector 2 meter long female PVC cable M12 connector 5 meter long female PVC cable GE-M12F-5X050-10M M12 connector 10 meter long female PVC cable GE-ABS606E LED Voltage Controller with 6 programmable channels and 10/100 Ethernet. Second level controller for Camera and illuminator. Cover Filter Second level controller for Camera and illuminator 2 7 TRIGGER OUT FOR CAMERA CCD/CMOS ACQUISITION SENSITIVITY CCD/CMOS Rev. 03/25 GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www.genesi-elettronica.com ®All Rights...

DEVELOP YOUR CUSTOM PRODUCT WITH OUR R&D TEAMs_>LED STATUS Mode -Electrical device exclusively for professional use. Installation can be done by qualified personnel only. -In case of power supply wire damage, its replacement has to be done at the head office exclusively. Warranty loss in case of inappropriate use and tampering. Design & Production Made in Italy GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www. aenesi-elettronica. com ®All Rights Reserved GENESI ELETTRONICA - GP - GENESI POWER BAR