GF - GENESI FLAT DOME Blue Line develop your custom solution Internal Controller with 4 driving modes 18StandardColours Ml2 5P Male Connector Illuminator Features : - Project achieved by internal resources and Genesi skills; - Fast controller which allows to have the following modes: continuous use,semi-continuous use,strobe - Microcontroller to monitor the pulse duration and the maximum temperature; - Model with opaline or transparent covers; - Powerful and Fast strobe mode with energy buffering and strobe duration control, min. pulse from 3 ps;

GF Part Number Ex. Code : AAABBB Length Heigth Base Opaline cover Base 6000K Cold White Cover variants Supply connection on demand Cover Accessory GFAAABBB-PX2-AP GFAAABBB-P-AP Part Number Examples: GF180180-6K Flat dome light 4 Driving Modes 180x180mm Hole 55mm White 6000K Opaline cover 3450/23100Lm 0,96/6,4A 23/154W 20cm cable M12 M 5P GF120120-850 Flat dome light 4 Driving Modes 180x180mm Hole 55mm IR 850nm Opaline cover 0,8/2,56A 19,2/61,5W 20cm cable M12 M 5P GF480480-625 Flat dome light 4 Driving Modes 480x480mm Hole 55mm RED 625 nm Opaline cover 5,2/25,2A 121/605W 20cm cable M12 M 5P Rev....

OPERATING MODE In this mode ^ Tonmax = 60 s - Dtmax = 50% it is possible to connect PIN4 directly to +24 V or PIN2 to GND. To use it in continuous mode with DTmax from 51% to 100%: it is necessary to use the heat sink or forced ventilation. In this mode ^ Tonmax = 10 ms - Dtmax = 10% AUTO-SWITCH in continuous use. ANALOG REGULATION USE 100% Connector PIN5 from 1 to 10 V can adjust the power from 10% to 100%. 400% STROBE USE POWER can be reached only from WHITE / VISIBLE / NIR LEDS, for other wavelengths check the power table at page 1. Microcontroller temperature protection — at 80°the PCB enables...

MECHANICAL DRAWING Unit of measurement Cable For 3D mechanical drawing requests - [email protected] LUMINOUS INTENSITY TEST GF420420 GB180180 Working Working distance Working Working distance Working Working distance Powers related to the white colour with homogeneity: ± 5% Rev. 01/25 GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www.genesi-elettronica.com ®All Rights Reserved GENESI ELETTRONICA - GF - GENESI FLAT DOME Organization with a certified ISO 9001:2015 Quality Management Syst

DEVELOP YOUR CUSTOM PRODUCT WITH OUR R&D TEAMs_>LED STATUS Mode The indicated IP protection degree is guaranteed only if the product is positioned downward STANDARDS -Electrical device exclusively for professional use. Installation can be done by qualified personnel only. -In case of power supply wire damage, its replacement has to be done at the head office exclusively. Warranty loss in case of inappropriate use and tampering. Design & Production Made in Italy GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www.aenesi-elettronica.com...