Product Overview

The GEMPC series consists of anodized aluminum LED lamps with a 1mm polycarbonate external cover, rated IP67 and IP69K for high protection against dust and water. These lamps are designed for professional use in outdoor environments and food processing lines, particularly as illuminators for vision inspection systems with cameras.

Models and Dimensions

• Available lengths: 9 cm, 18 cm, 25 cm, 42 cm, 50 cm, 100 cm, 200 cm, and custom lengths.
• Two cover variants: Transparent (-T) and Opaline (-OP), both with a 120° beam angle.
• Overall profile diameter: 31.5 mm.

Electrical Specifications

• Supply voltage: 24 Vdc ±10%.
• Standard supply currents per LED: 20 mA, 40 mA, 85 mA, and 300 mA (impulsive use, max 1/10 duty cycle).
• Power consumption varies by model, ranging from 2.0 W to 48.0 W.
• Typical luminous flux ranges from 280 lumens (smallest model) up to 6720 lumens (largest model).
• Typical illumination at 50 cm distance ranges from 180 lux to 1950 lux depending on model size.

Mechanical and Environmental Characteristics

• Operating temperature range: -40°C to +55°C.
• Protection against direct sunlight exposure while the lamp is on is not recommended.
• Housing material: anodized aluminum with polycarbonate cover.
• Color options for LED light: Natural White (4000K), Warm White (3000K), Cold White (6000K), and custom IR/UV/Color options.

Connection and Cabling Options

• Multiple connector types available: M8 3-pole male, M12 5-pole male, with cable lengths of 20 cm, 2 m, and 5 m.
• Versions include standard 2-pole cables and Start/Strobe signal variants with max 10 mA drive current.
• Wiring color codes: V+ (Brown), GND (Blue), Start (Black).
• Cables and connectors comply with food industry standards (DIN / VDE 0472 part 815).

Standards and Certifications

• Protection ratings: IP67 and IP69K.
• Electromagnetic compatibility (EMC) compliance: EN 61547:2009, EN 55015:2013 + A1.
• Photobiological safety: EN 62471:2008 (Risk Exempt), EN 62493:2015 for human exposure to electromagnetic fields.
• Non-halogen verification according to DIN EN 50267-2-1.
• Manufactured under ISO 9001:2015 certified quality management system.

Usage and Safety Recommendations

• Intended for professional use only; installation must be performed by qualified personnel.
• Do not expose lamps to direct sunlight while powered on.
• In case of power cable damage, replacement must be done exclusively by the manufacturer to avoid warranty loss.
• Improper use or tampering voids warranty.

Summary of Key Parameters by Model

Additional Notes

3D mechanical drawings are available upon request. Custom lengths and configurations can be provided to meet specific application needs. The lamps are suitable for harsh environments requiring high ingress protection and compliance with food industry safety standards.