
GB - GENESI BACKLIGHT Blue Line Stainless steel IP69K Version (page 5) Internal controller with 4 driving modes Internal Controller with 4 driving modes Illuminator Features : - Project achieved by internal resources and Genesi skills; - Fast controller which allows to have the following modes: continuous use,semi-continuous use,strobe (PNP, NPN), analog regulation. - Microcontroller to monitor the pulse duration and the maximum temperature; - Model with opaline or transparent covers; - Powerful and Fast strobe mode with energy buffering and strobe duration control, min. pulse from 3 ps; Genes# LUX GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY infoialaenesi-lux.it - TEL. +39 059785566 - www.aenesi-elettronica.com ®AII Rights Reserved GENESI ELETTRONICA - GB - GENESI BACKLIGHT
Open the catalog to page 1GB Part Number Ex. Code : AAABBB Lengths Heights Cover variants Base Opaline cover Base 6000K Cold White Supply connection on demand Cover Accessory Swir GBAAABBB-P-AP GBAAABBB-C-AP Part Number Examples: GB180180-6K Backlight 4 Driving Modes 180x180mm White 6000K Opaline cover 3900/26000Lm 1,08/7,2A 26/173W 20cm cable M12 M 5P Rev. 01/25 GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www.genesi-elettronica.com ®All Rights Reserved GENESI ELETTRONICA - GB - GENESI BACKLIGHT Organization with a certified ISO 9001:2015 Quality...
Open the catalog to page 2OPERATING MODE In this mode ^ Tonmax = 60 s - Dtmax = 50% it is possible to connect PIN4 directly to +24 V or PIN2 to GND. To use it in continuous mode with DTmax from 51% to 100%: it is necessary to use the heat sink or forced ventilation. In this mode ^ Tonmax = 10 ms - Dtmax = 10% AUTO-SWITCH in continuous use. ANALOG REGULATION USE 100% Connector PIN5 from 1 to 10 V can adjust the power from 10% to 100%. 400% STROBE USE POWER can be reached only from WHITE / VISIBLE / NIR LEDS, for other wavelengths check the power table at page 1. Microcontroller temperature protection — at 80°the PCB enables...
Open the catalog to page 3MECHANICAL DRAWINGLenght BASE MODEL N°4 M4 7F26 Threaded Holes CableFor 3D mechanical drawing requests - info(S)aenesi-lux.it - OP BACKLIGHT FUNCTION Powers related to the white colour with homogeneity: ± 5% Genes i LUX* GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www.aenesi-elettronica.com ®All Rights Reserved GENESI ELETTRONICA - GB - GENESI BACKLIGHT
Open the catalog to page 4GB has a stainless steel 316 case with an IP69K cable. A polyurethane resin and an adhesive gasket are used for the fastening of the 5 mm polycarbonate cover. IP69K allows the maximum protec�on against dust (IP6_), and water (IP_9K), also in installa�ons with high pressure or steam cleaning systems. The stainless steel case together with the polycarbonate cover guarantee high resistance to physical and chemical agents in order to ensure working in all condi�ons while thanks to the integrated electronics all the driving modes of the Blue Line and the temperature and over�me controls. Rev. 01/25...
Open the catalog to page 5ACCESSORIES CODE GBAAABBB-PX2-AP Additional protection 2 mm transparent plexiglass + screws GBAAABBB-P-AP Additional protection 2 mm Transparent plexiglass + Polarizing Filter horizontal + screws GBAAABBB-C-AP Additional protection 2 mm Transparent plexiglass + Collimating Filter + screws GE-M12F-5X050-2M M12 connector 2 meter long female PVC cable GE-M12F-5X050-5M M12 connector 5 meter long female PVC cable GE-M12F-5X050-10M M12 connector 10 meter long female PVC cable GE-ABS606E LED Voltage Controller with 6 programmable channels and 10/100 Ethernet. Second level controller for Camera and illuminator....
Open the catalog to page 6DEVELOP YOUR CUSTOM PRODUCT WITH OUR R&D TEAMs_> LED STATUS Mode The indicated IP protection degree is guaranteed only if the product is positioned downward STANDARDS -Electrical device exclusively for professional use. Installation can be done by qualified personnel only. -In case of power supply wire damage, its replacement has to be done at the head office exclusively. Warranty loss in case of inappropriate use and tampering. Design & Production Made in Italy GENESI ELETTRONICA SRL - VIA BACHELET, 3/A - 41057 SPILAMBERTO (MO) - ITALY [email protected] - TEL. +39 059785566 - www.aenesi-elettronica.com...
Open the catalog to page 718 Pages
1 Page
1 Page
5 Pages
5 Pages
2 Pages
2 Pages
2 Pages
6 Pages
6 Pages
6 Pages
2 Pages
2 Pages
2 Pages
2 Pages
6 Pages
5 Pages
6 Pages
4 Pages
2 Pages
6 Pages
6 Pages
6 Pages
4 Pages
12 Pages
35 Pages
7 Pages
5 Pages
2 Pages
2 Pages
5 Pages
5 Pages
5 Pages
5 Pages
5 Pages
2 Pages