Micro Polarization Controller PSM-003-C This OEM micro polarization controller integrates General Photonics' all-fiber dynamic polarization control technology with miniature electronic drive/control circuitry into a compact, self-contained device that provides full polarization control functionality while minimizing volume, power consumption, and cost. The state of polarization (SOP) of the output signal can be controlled via three analog 0 to 5V control voltages. This device is ideal for integration into OCT or sensor systems to maximize signal output. It requires only ±12VDC power supplies, and its low power consumption enables use in batterypowered handheld devices. Preliminary Specifications Operating Wavelength Range Number of control waveplates Rise and Fall Time Frequency of Input Sine Wave Insertion loss Control grade: Measurement grade: > 65 dB excluding connectors Control grade: Measurement grade: Control grade: Measurement grade: Activation loss Email: [email protected] Polarization control in sensor systems Fiber Pigtail 9/125 µm single mode fiber standard, others specify Electrical Interface Power Supply Power Consumption Polarization control in measurement systems 0.1 dB, excluding connectors 0.05 dB, excluding connectors Optical Power Handling Website: www.generalphotonics.com Polarization control in OCT systems Return loss Control Voltage General Photonics Corp. 5228 Edison Ave. Chino, CA 91710 1260 to 1650 nm standard, others specify Unique Features: Compact Low power consumption Low cost Plug and play Operating Temperature Storage Temperature Notes: 1. 5V input on all 3 axes at 25°C. Ordering Information: PSM – 003 –C – XX – X – X Connector Type: FC/PC, FC/APC SC/PC, SC/APC NC=no connector Wavelength: 7=1260-1650nm 6=980-1300nm Grade: C = Control M = Measurement