Features • Motorized linear actuator for Open/Close applications • Self-locking spindle actuator • Safety shut-down integrated • Standard optical position indicator and manual override • Integrated emergency power supply module (optional) • Electrical position indicator GEMU 1215 (optional) The GEMU R629 eSyLite 2/2-way diaphragm valve is motorized. It is available in an Open/Closed version. An integrated optical position indicator is standard. The self-locking actuator holds its position in a stable manner in the event of power supply failure. • Body configurations: 2/2-way body • Connection types: Flange l Flare l Solvent cement socket l Spigot l Threaded connection l Union end • Connection standards: ANSI l ASTM l BS l DIN l EN l ISO l JIS • Body materials: ABS l Inliner PP-H, grey / outliner PP, reinforced l Inliner PVDF/outliner PP, reinforced l PP, reinforced l PP-H, natural l PVC-U, grey l PVDF • Diaphragm materials: EPDM l FKM l NBR l PTFE/EPDM Technical data depends on the respective configuration further information webcode: GW-R629

Product description

Product description GEMÜ CONEXO The interaction of valve components that are equipped with RFID chips and an associated IT infrastructure actively increase process reliability. Thanks to serialization, every valve and every relevant valve component such as the body, actuator or diaphragm, and even automation components, can be clearly traced and read using the CONEXO pen RFID reader. The CONEXO app, which can be installed on mobile devices, not only facilitates and improves the "installation qualification" process, but also makes the maintenance process much more transparent and easier to document....

MG = diaphragm size, X = standard 1) Connection type Code 0: Spigot DIN Code 20: Spigot for IR butt welding Code 28: Spigot for IR butt welding, BCF Code 30: Spigot - inch, for welding or solvent cementing, depending on the body material Code 7X: Body with threaded spigots for unions 2) Valve body material Code 1: PVC-U, grey Code 4: ABS Code 5: PP, reinforced Code 20: PVDF Code 71: Inliner PP-H, grey, outliner PP, reinforced Code 75: Inliner PVDF/outliner PP, reinforced

MG = diaphragm size X = Standard Code 1: Threaded socket DIN ISO 228 2) Valve body material Code 1: PVC-U, grey Code 5: PP, reinforced Code 20: PVDF

MG = diaphragm size X = Standard Code 75: Flare connection with PVDF union nut Valve body material

MG = diaphragm size 1) Connection type Code 0: Spigot DIN Code 1: Threaded socket DIN ISO 228 Code 2: Solvent cement socket DIN Code 7: Union end with insert (socket) - DIN Code 30: Spigot - inch, for welding or solvent cementing, depending on the body material Code 33: Union end with inch insert - BS (socket)

Order data The order data provide an overview of standard configurations. Please check the availability before ordering. Other configurations available on request.

Order data

Technical data Technical dataMediumWorking medium:TemperatureMedia temperature: Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and chemical properties of the body and diaphragm material. The valve will seal in both flow directions up to full operating pressure (gauge pressure). Valve body material Ambient temperature: Valve body material Storage temperature: Operating pressure: Pressure rating: Leakage rate: If the emergency power module is used (control module code A1, A2, Z1, Z2), the maximum ambient temperature is reduced to 40 °C. All pressures are...

Technical data The pressure rating (PN) depends on the diaphragm size. Data for extended temperature ranges on request. Please note that the ambient temperature and media temperature generate a combined temperature at the valve body which must not exceed the above values. MG = diaphragm size, Kv values in m3/h Kv values determined acc.to DIN EN 60534 standard, inlet pressure 5 bar, Ap 1 bar, PVC-U valve body and soft elastomer diaphragm. The Kv values for other product configurations (e.g. other diaphragm or body materials) may differ. In general, all diaphragms are subject to the influences...

Technical data Food: EMC Directive: RoHS Directive: Drinking water: * depending on version and/or operating parameters Drinking water hygiene suitability according to system 1+ (special function 1) UBA-BWGL for plastics and other organic materials, Materials: GEMU R629 12 / 35 www.gemu-group.com

Technical data Technical data Mechanical data Protection class: Actuating speed: Flow direction: Installation position: MG = diaphragm size Weights in kg Observe the angle of rotation to achieve an installation for optimized draining Valve body_

Technical data Service life: Class A acc. to EN 15714-2 Minimum 100,000 switching cycles at room temperature and permissible duty cycle. Duty cycle: max. 30% duty Operating time: Close tight current / rated current: Standby current consumption:Digital input signalsInput voltage:High level:Low level: MG 8: Approx. 0.7 A MG 10: Approx. 2.4 A MG 20: Approx. 2.4 A MG 25: Approx. 2.4 A MG 40: Approx. 4.5 A MG 50: Approx. 4.5 A Minimum actuation dura- 600 ms tion: Input current: < 0.6 mA Charging current: Charging time: Service life: Guide value at 25 °C ambient temperature, approx. 3 years

Electrical connection 7-pin plug, Binder, type 693

Preferred direction if both digital inputs are present for device version 01 (see operating instructions - Product label)

Dimensions in mm MG = diaphragm size * CT = A + H1 (see body dimensions) MG 50 with metal distance piece

MG 50 with metal distance piece

MG 50 with metal distance piece

Connection type spigot DIN (code 0) 1), body material PVC-U (code 1), PP (code 5), PVDF (code 20), inliner/outliner (code 71, 75) 2)_ Dimensions in mm MG = diaphragm size 1) Connection type Code 0: Spigot DIN Code 30: Spigot - inch, for welding or solvent cementing, depending on the body material 2) Valve body material Code 1: PVC-U, grey Code 4: ABS Code 5: PP, reinforced Code 20: PVDF Code 71: Inliner PP-H, grey, outliner PP, reinforced Code 75: Inliner PVDF/outliner PP, reinforced