Features • High mechanical stability • High flow rate due to straight through flow • Optional flow direction • Valve can be cleaned without disassembly of actuator • Proven motorized actuators and control units in modular design The GEMU 638 2/2-way diaphragm valve has AUMA motor and control units and is motorized. The valve body is a full bore design. • Body configurations: 2/2-way body • Connection types: Flange • Connection standards: ANSI l EN • Body materials: EN-GJL-250, cast iron material l EN-GJL-250, cast iron material with hard rubber lining l EN-GJL-250, cast iron material with soft rubber lining • Diaphragm materials: CR l EPDM l IIR l NBR l PTFE/EPDM Technical data depends on the respective configuration further information webcode: GW-638

Product description

Product description GEMÜ CONEXO The interaction of valve components that are equipped with RFID chips and an associated IT infrastructure actively increase process reliability. Thanks to serialization, every valve and every relevant valve component such as the body, actuator or diaphragm, and even automation components, can be clearly traced and read using the CONEXO pen RFID reader. The CONEXO app, which can be installed on mobile devices, not only facilitates and improves the "installation qualification" process, but also makes the maintenance process much more transparent and easier to document....

MG = diaphragm size, X = standard Code 53: Flange EN 1092, PN 16, form A, face-to-face dimension FTF EN 558 series 7, ISO 5752, basic series 7, length only for body configuration D Code 58: Flange ANSI Class 125/150 FF, face-to-face dimension FTF EN 558 series 7, ISO 5752, basic series 7, length only for body configuration D 2) Valve body material Code 13: EN-GJL-250 (GG 25), hard rubber lined Code 52: EN-GJL-250 (GG 25), soft rubber lined

Actuator assignment LE 12.1 (50) = linear thrust unit from AUMA with a stroke of 50 mm LE 25.1 (100) = linear thrust unit from AUMA with a stroke of 100 mm As standard, the AUMA AM01.1 control unit is used for actuators and the AUMA AC01.2 control unit is used for control actuators. Other control units on request. Information for order data The order must include two items. Item 1: Valve with adapter and suitable AUMA linear thrust unit e.g. 638 80 D 53 13 14 For details on the AUMA linear thrust unit, see AUMA's technical documentation. Item 2 AUMA rotary actuator1 For details, see AUMA's technical...

Order data The order data provide an overview of standard configurations. Please check the availability before ordering. Other configurations available on request. Products ordered with bold marked ordering options are so-called preferred series. Depending on the nominal size, these are available more quickly.

Order data

Technical data for diaphragm valve Working medium: Media temperature: Ambient temperature: Storage temperature: Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and chemical properties of the body and diaphragm material. MG = diaphragm size Kv values in m3/h Kv values determined in accordance with EN 60534, inlet pressure 5 bar, Ap 1 bar, valve body material cast iron EN-GJL-250 with connection flange EN 1092 length EN 558 series 7 and soft elastomer diaphragm. The Kv values for other product configurations (e.g. other diaphragm or body materials) may differ....

Technical data for actuator Technical data for actuator MG = diaphragm size Weights in kg Product compliance Machinery Directive: 2006/42/EC Note: For technical data see manufacturer's original datasheets

Actuator dimensions

Flange, length EN 558 (code 53) 1(, cast iron material code 8, 13, 52 2) MG Dimensions in mm MG = diaphragm size n = number of bolts Code 53: Flange EN 1092, PN 16, form A, face-to-face dimension FTF EN 558 series 7, ISO 5752, basic series 7, length only for body configuration D 2) Valve body material Code 13: EN-GJL-250 (GG 25), hard rubber lined Code 52: EN-GJL-250 (GG 25), soft rubber lined

Flange, length EN 558 (code 58) 1(, cast iron material (code 8, 13, 52) 2) MG Dimensions in mm MG = diaphragm size n = number of bolts Code 58: Flange ANSI Class 125/150 FF, face-to-face dimension FTF EN 558 series 7, ISO 5752, basic series 7, length only for body configuration D 2) Valve body material Code 13: EN-GJL-250 (GG 25), hard rubber lined Code 52: EN-GJL-250 (GG 25), soft rubber lined

Diaphragm dimensions Diaphragm dimensions Dimensions in mm, MG = diaphragm size n = number of bolts The thread of the diaphragm pin "W" corresponds to Whitworth standard.

GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG Fritz-Müller-Straße 6-8, 74653 Ingelfingen-Criesbach, Germany Phone +49 (0) 7940 1230 · [email protected] www.gemu-group.c