HTKC75 linear actuator catalog
6Pages

P%GeMinG j Linear Drive GeMinG(CHINA) CO., LTD. 1. Solar Tracking 2. Industrial 3. Agricultural KC75 is a pen-type tubular linear actuator with an outer tube diameter of 75mm, suitable for installation in narrow spaces. This model is designed for clean energy products, can be used for Single-axis solar bracket, dual-axis solar bracket. Features Voltage: Max Push/Pull Force: Speed @ Full load: Retracted Length: Color: Black Quality Management: ISO9001-2008, certified by CE and ROHS Ambient temp. Range: -45 ° C ~ + 75 ° C Operating Temp. Range: +5 ° C ~ + 45 ° C Screw Type: Trapezoidal Signal Output(Optional) Hall sensor Control System(Optional): Synchronous Control(100%),Separate Control Material: SS304 inner tube,and metal gear box Limit Switches: Built-in(not adjustable)

Series model The high price of photovoltaic solar energy has promoted the application of solar tracking brackets. Using the solar panel tracking system can increase the output efficiency of the solar panel by 30%. The accurate positioning of the panel is a challenge, the system is rugged and able to withstand strong winds and heavy snow, and it operates stably without maintenance.

S: Stroke L: Retracted length L= Stroke +500mm Stroke >= 400MM, L= Stroke +550MM , GeMinG Linear Drive

LOAD & SPEED Code Rated Load Push (N) Rated Load Pull (N) Rated Current Rated Speed Rated Speed 1. The current and speed in the table are the averages tested when using push force. 2. The current & speed results in the table are based on the use of a GaMinG brand control box, and there will be an error of about 10% depending on different types of the control box. 3. 29V DC @ no-load, 24V DC @ rated load 4. 12V motor has two times of current as 24v, but same speed. Load (N) Stroke range(mm) Reference Chart KC75 Stroke ± 2 (mm) Retracted Length ± 2 (mm) Stroke & Retracted length: 1. If stroke...

, eMinG j/0 Linear Drive Speed(mm/s) Refer to Page 4 Retracted Length(mm) Load(n) Refer to Page 4 1 = Normal, dia 20.5mm Front Attachment 3 = U shape, width 10mm, dia 20.5mm Referto Page6 5 = Otype, width 30mm, dia 20.5mm 7 = Joint,dia 20mm, type GS20 Rear Attachment 1 = normal, dia 20.5mm Referto Page6 2= Normal, dia 22.5mm 4= U shape, width 10mm, dia 22.5mm 6 = Otype, width 30mm, dia 22.5mm 8 = Joint, dia24mm, type GS24 Wire/Plug 1 = stripped wire 2 = 4 pin 90° curved plugReferto Page6 3 = 4 pin 0° straight plug 4 = 6 pin 0° straight plug Screw P = Trapezoidal Signal Output N = No H =...

KC75 Reference Chart for Attachment Front Attachment 1= Normal，Aperture 20.5 4= U-type slot, width 10, 3= U-type slot, width 10, width Rear Attachment 1= 0 degree，Aperture 20.5 Wire / Plug 1= stripped wire