HTKC35 linear actuator catalog

Product catalog summary

Overview: The HTKC35 series is a model of linear actuators designed by GeMinG (China) Co., Ltd. These actuators are suitable for various applications including industrial, construction, ships, ventilation, and automotive sectors. They share a design with the KC55 and KC75 models and are ideal for installation in narrow spaces. An optional waterproof rating of up to IP69 is available, providing resistance to high temperature and high-pressure water impact.

Specifications:

Voltage Options: 12V DC, 24V DC
Maximum Push/Pull Force: 1200N
Speed at Full Load: 5mm/s (with 1200N load)
Retracted Length: Stroke + 220mm (or Stroke + 250mm if Stroke > 300mm)
Dynamic Torque: 80Nm
Static Torque: 160Nm
Color: Black
Noise Level: 62DB
Quality Management: ISO9001-2008, CE and ROHS certified
Operating Temperature Range: +5°C to +45°C
Ambient Temperature Range: -45°C to +75°C
Protection Level: IP66
Screw Type: Trapezoidal
Optional Signal Output: Hall sensor
Control System Options: 100% Synchronous Control or Individual Control using Geming controller
Material: SS304 inner tube and metal gearbox
Limit Switch: Not included

Load and Speed Characteristics:

For 12V DC: Rated loads range from 100N to 1200N with varying speeds and currents.
For 24V DC: Similar load range with slightly different speed and current characteristics.
Current and speed values are averages tested with push force using a GeMinG brand control box, with a potential error margin of about 10%.

Dimensions:

Retracted Length is calculated as Stroke + 220mm for strokes less than 300mm, and Stroke + 250mm for strokes 300mm or more.

Selection and Customization:

Voltage, speed, stroke, retracted length, load, front and rear attachments, wire/plug type, screw type, signal output, and wire length can be customized based on specific requirements.

Attachments and Wiring:

Various options for front and rear attachments, including normal and U-type slots with different apertures.
Wire/plug options include stripped wire and various pin configurations.

Disclaimer: Users are responsible for determining the suitability of the actuator for their specific application. GeMinG reserves the right to make modifications or changes without prior notice.

Catalog excerpts

P%GeMinG j Linear Drive GeMinG(CHINA) CO., LTD. HTKC35 Series model Applications 1. Industrial KC35 has the same design as KC55 and KC75. They are in-line linear actuators, suitable for installation in narrow space. Optional waterproof rating up to IP69, which can withstand high temperature, high-pressure water impact. 2. Construction 3. Ships 4. Ventilation 5. Automotive Speed @ Full load: 5mm/s (load 1200N) Retracted Length: Color: Black Quality Management: ISO9001-2008, certified by CE and ROHS Ambient temp. Range: -45 ° C ~ + 75 ° C Operating Temp. Range: +5°C~ + 45°C Protection Level: Screw Type: Optional Signal Output: Option for Control System: Material: Limit Switch: IP66 Trapezoidal Hall sensor 100% Synchronous Control(using Geming controller) Individual control(using Geming controller) SS304 inner tube,and metal gear box No

Open the catalog to page 1

Series model For adjusting knives, tables and chairs, steering wheel and driver's seat.

Open the catalog to page 2

Series model S: Stroke L: Retracted length L= Stroke +220mm When stroke>=300mm, L= Stroke +250MM , GeMinG Linear Drive

Open the catalog to page 3

LOAD & SPEED Code Rated Load Rated Load Self-lock Rated Current Rated Speed Rated Speed Push Pull Static Full-load No-load Full-load 1. The current and speed in the table are the averages tested when using push force. 2. The current & speed results in the table are based on the use of a GeMinG brand control box, and there will be an error of about 10% depending on different types of the control box. 3. 29V DC @ no-load, 24V DC @ rated load Reference Chart HTKC35 Model Load ±10% (N) Speed ± 2 (mm / sec) Stroke & Retracted length: 1. If stroke <300mm, Retracted length = stroke +220mm Eg. Stroke...

Open the catalog to page 4

, eMinG j/0 Linear Drive Speed(mm/s) Refer to Page 4 Retracted Length(mm) Load(N) Refer to Page 4 Front Attachment 1 = Aperture 8.° 3 = U shape, width 6.1mm,dia 8.0mm Refer to Page 6 5 = Otype, width 15mm, dia 8.0mm 2= Normal, dia 10.0mm 4 = U shape, width 8mm, dia 10.0mm 6 = O type, width 15mm, dia 10.0mm Rear Attachment 1 = normal, dia 10mm Refer to Page 6 Wire/Plug 1 = stripped wire Refer to Page 6 3 = 4 pin 0° straight plug 2 = 4 pin 90° curved plug 4 = 6 pin 0° straight plug Screw P=Trapezoidal Signal Output N = No H = Hall Sensor Wire Length 1 = 600mm 2 = 1000mm 3 = 1500mm 4 = customized...

Open the catalog to page 5

HTKC35 Reference Chart for Attachment Front Attachment 1=Normal, Aperture 8.0 Rear Attachment 2=0 degree，Aperture 12.0mm Wire / Plug 1= stripped wire

Open the catalog to page 6

HTKC35 linear actuator catalog

HTKC35 linear actuator catalog

Catalog excerpts

All GeMinG Driven catalogs and technical brochures