HTB3 lifting column
6Pages

GeMinG(CHINA) CO., LTD. HTB3 Series model Lifting Column Applications 1. Medical 2. Furniture HTB3 is one of the lifting column products developed by GeMinG. It is professionally suitable for medical working environments, such as hospital beds, home care beds, clinic tables, and height-adjustable working. HTB3 adopts a three-section outer tube to provide stable movement and can provide the smallest installation size and longer stroke options. Features Voltage: Max Push/Pull Force: Speed @ Full load: Retracted Length: Dynamic Torque: Static Torque: Color: Noise: Quality Management: Ambient temp. Range: Operating Temp. Range: Protection Level: Screw Type: Signal Output:(optional) Control System:(optional) Material: Limit Switches: Duty Cycle: 24V DC permanent magnet motor 2000N(Push), 800N(Pull) 10.mm/s (load 2,000N) stroke/2 + 150mm 250Nm 500Nm silver 48-50DB ISO9001-2008, certified by CE and ROHS +5 ° C ~ + 45 ° C -35 ° C ~ + 85 ° C IP54 Trapezoidal Hall sensor Synchronous Control(100%),Separate Control Aluminium alloy Built-in(not adjustable) 2min on, 18min off

Series model

S: Stroke L: Retracted length L= Stroke / 2 +150mm Stroke >=400MM, L= Stroke / 2 +200MM 1= Lower side outlet 2= Upper side outlet Linear Drive

LOAD & SPEED Code Rated Load Rated Load Self-locking Rated Current Rated Speed Rated Speed Push Pull Static Full-load No-load Full-load 1. The current and speed in the table are the averages tested when using push force. 2. The current & speed results in the table are based on the use of a GaMinG brand control box, and there will be an error of about 10% depending on different types of the control box. 3. Lateral moment Y direction = X * 0.8 4. Static lateral torque = dynamic * 2 Dynamic lateral torque(Nm)-X direction Reference Chart HTB3 load±10% (N) speed ± 2 (mm / sec) HTB3 stroke ± 2...

eMinG fg0 Linear Drive Speed(mm/s) Refer to page 4 Retracted Refer to page 4 length(mm) Load(n) Refer topage4 2 = bigger plates, with 4 fixing holes Mounting Plates 1 = smaller plates, with 4 fixing holes Refer to page 6 Cable outlet Refer to page 3 2 = 4 pin 90° curved plug 4 = 6 pin 0° straight plug Wire/Plug 1 = stripped wire Refer to page 6 3 = 4 pin 0°straight plug Signal Output N = NO H = HALL SENSOR Cable length 1 = 600mm 2 = 1000mm 3 = 1500mm 4 = Customized Statement It is the user's responsibility to determine whether the licensed application is suitable for a particular product....

HTB3 Reference Chart for Attachment Upper Mounting Plates 1=smaller plate Bottom Mounting Plates 1=smaller plates