www.Gemingag.com HTB2 Series model Lifting ColumnApplications 1. Industrial Workbenches Assembly tables Laser machine 2. Medical Medical lifting equipment Dental Chair Medical bed X-ray machine The HTB2 lifting column is suitable for a variety of workstation applications. With a full-featured office series control box and hand command, It is available for individual working and synchronized working with 2 to 16 lifting columns according to different application environments 3. Furniture Lifting projectors Coffee tables Bar tables Kitchen height adjustable Conference room audition

Series model  Height adjustment  Horizontal adjustment

S: Stroke L: Retracted length L= Stroke +180mm L= Stroke +200MM Cable outlet: 1=Lower side outlet GeMinG Linear Drive

Code Rated Load Push (N) Voltage (24V DC) A 4000 Rated Load Pull (N) Self-locking Rated Current Rated Speed Rated Speed Static Full-load No-load Full-load 1. The current and speed in the table are the averages tested when using push force. 2. The current of a 12V motor is about twice that of a 24V motor, while 36V motor is about 2/3 of that of a 24V motor, the speed is about the same. 3. The current & speed results in the table are based on the use of a GaMinG brand control box, and there will be an error of about 10% depending on different types of the control box. 4. Lateral moment Y direction...

eMinG fg0 Linear Drive Voltage 12=12VDC 24=24V DC 110-220= with controller Speed(mm/s) Refer to Page 4 Retracted length(mm) Load(n) Refer to page 4 Mounting Plates 1 = smaller plates, with 4 fixing holes Reterto page 6 2 = bigger plates, with 4 fixing holes Cable outlet Refer to page 3 Wire/Plug 1 = stripped wire 2 = 4 pin 90° curved plug Refer to page 6 3 = 4 pin 0°straight plug 4 = 6 pin 0° straight plug Signal Output N = NO H = HALL SENSOR Cable length 1 = 600mm 2 = 1000mm 3 = 1500mm 4 = customized Eg.: voltage 24V DC, stroke 100MM, speed 5MM/s, load 4000N Code: HTB2-24-5-100-280 / 380-4000-1-1-1-P-A-N-1...

HTB2 Reference Chart for Attachment Upper Mounting Plates Bottom Mounting Plates 1= smaller plates