HTA25 linear actuator catalog
6Pages

P%GeMinG j Linear Drive GeMinG(CHINA) CO., LTD. HTA25Series model Applications 1. Industrial 2. Furniture 3. Agricultural 4. Construction 5. Ventilation 6. Car Roof HTA25 model has a greater push force in the small linear actuator market. The short installation size and compact design ensure that the installation is not limited by distance. The maximum load capacity of this model can reach 350KG, which is very cost-effective. Due to IP54 protection, this product is not suitable for exposure to outdoor environments. Features Voltage: Max Push/Pull Force: Speed @ Full load: Retracted Length: Dynamic Torque: Static Torque: Color: Noise: Quality Management: 12V, 24V, 36V, 48V DC 3500N (Push) , 2000N (Pull) 5.mm / s (load 3500N) Stroke + 105mm Stroke + 120mm(S >300 MM) 30Nm 60Nm Silver, Black 56DB ISO9001-2008, certified by CE and ROHS Ambient temp. Range: -25 ° C ~ + 70 ° C Operating Temp. Range: +5 ° C ~ + 45 ° C Screw Type: Trapezoidal Option for Signal Output: Hall sensor Option for Control System: Separate Control Material: High-strength metal zinc alloy gear box and housing Limit Switches: Built-in, but not adjustable

improves ergonomics and the level of operator access security To ensure maximum safety

S: Stroke L: Retracted length L= Stroke +105mm Stroke>=300MM, L= Stroke +120MM Mounting Angle (Counterclockwise): 1=0° 2 = 90° Linear Drive

Code Rated Load Rated Load Self-locking Rated Current Rated Speed Rated Speed Push Pull Static Full-load No-load Full-load 1. The current and speed in the table are the averages tested when using push force., 2. The current & speed results in the table are based on the use of a GeMinG brand control box, and there will be an error of about 10% depending on different types of the control box. 3. 29V DC @ no-load, 24V DC @ rated load Load (N) Stroke Range(mm) Reference Chart HTA25 Model Load ±10% (N) Speed ± 2 (mm / sec) HTA25 Model Stroke ± 2 (mm) Retracted Length ± 2 (mm) Stroke & Retracted...

, eMinG j/0 Linear Drive Speed(mm/s) Refer to page 4 Load(n) Refer to page 4 2 = Normal, dia 10.5mm 4 = U shape, width 8mm, dia 10.5mm 6 = Otype, width 14mm, dia 10.5mm Front Attachment 1 = Normal, dia 8.5mm 3 = U shape, width 8mm, dia 8.5mm Refer to page 6 5 = Otype, width 14mm, dia 8.5mm Rear Attachment 1 =0°, dia 8.5mm Refer to page 6 3 =90 ,dia 8.5mm Wire/plug 1 = stripped wire 2 = 4 pin 90° curved plug Refer to paqe 6 3 = 4 pin 0° straight plug 4 = 6 pin 0° straight plug Signal Output N = NO H = HALL SENSOR Wire Length 1 = 600mm 2 = 1000mm 3 = 1500mm 4 = customized Eg. Voltage 12V DC,...

HTA25 Reference Chart for Attachment Front Attachment 1=Normal, Aperture 8.5 Rear Attachment 1=0 degree, Aperture 8.5mm Wire / Plug 1= stripped wire