*mydirectindustry

VRM

VRM

Product catalog summary

Overview: The document provides technical specifications for the GE Series CS Hydraulic Valves, specifically the VRM Series Relief Valve in Manifold with Manometer Port. These valves are made of carbon steel and are available in sizes DN10, DN13, and DN20 with various end connections including BSP, NPT, and SAE. They are designed to handle pressures up to PN350 and operate within a temperature range of -20°C to +80°C.

Specifications:

Material: Carbon Steel, Galvanized
Pressure: Up to PN350
Temperature Range: -20°C to +80°C
Sizes: DN10, DN13, DN20
Ends: BSP, NPT, SAE

Structure: The valves are available in different configurations based on the type and way of valve ends, including GAS DIN/ISO 228, NPT ANSI/ASME B1.20.1, and SAE J1926-1. The material used is carbon steel.

Performance: The valves have a maximum flow rate of 45 L/min for DN10, 70 L/min for DN13, and 90 L/min for DN20. They are compatible with fluid viscosities as per ISO 3448 and require filtration according to ISO4406. The standard seals are made of NBR 70 Shore A, with Viton available on request. The setting range varies from 10-180 bar to 80-300 bar depending on the model.

Dimensions and Weight: Detailed dimensions and weights are provided for each valve type and size, with item codes for ordering. The company reserves the right to make dimensional changes without prior notice.

Catalog excerpts

HYDRAULIC VALVES ❚ VRM RELIEF VALVE IN MANIFOLD WITH MANOMETER PORT Carbon Steel • Type: Relief Valve in Manifold with Manometer Port • Sizes: DN10-DN13-DN20 • Ends: BSP-NPT-SAE • Pressure: up to PN350 • Temp range: from -20°C to +80°C • Treatmen

Open the catalog to page 1

HYDRAULIC VALVES ❚ STRUCTURE Type and way of valve FEATURES MAX. FLOW (L/MIN) FLUID VISCOSITY FLUID TEMPERATURE AMBIENT TEMPERATURE STANDARD SEALS SEALS MATERIAL SETTING RANGE STANDARD SETTING ADJUSTMENT Screw with steel cap Tamper resistant cap* Handknob and loc

Open the catalog to page 2