*mydirectindustry

VODE

Product catalog summary

Overview
The document provides technical specifications and details for the GE Series Double Effect Overcenter Valves, specifically the VODE series, made from carbon steel. These valves are designed for hydraulic systems and are available in various sizes and connection types.

Specifications

Type: Double Effect Overcenter Valve
Sizes: DN6-DN20
Ends: BSP, NPT, SAE
Pressure: Up to PN350
Temperature Range: -20°C to +90°C
Treatment: Galvanized Carbon Steel

Structure and Materials

The valves are structured with various end types including GAS DIN/ISO 228, BSP, NPT ANSI/ASME B1.20.1, and SAE J1926-1.
Material used is Carbon Steel.

Performance and Features

Pilot ratios available are 4.25:1, 6.25:1, with options for 8:1 and 11:1 on request.
Standard seals are NBR with a steel cap, and a tamper-proof cap is available.
Fluid viscosity and filtration standards are ISO 3448 and ISO 4406 respectively.
Fluid temperature range is -20°C to +90°C, and ambient temperature range is -20°C to +50°C.

Dimensional and Flow Specifications

Valves are available in sizes ranging from 1/4" to 3/4" with corresponding pilot ratios and maximum flow rates.
Each valve type has specific dimensions and weight, with detailed measurements provided in both metric and imperial units.

Additional Notes

The company reserves the right to make dimensional changes without prior notice.

Catalog excerpts

GE Series VODE Series HYDRAULIC VALVES ❚ VODE DOUBLE EFFECT OVERCENTER VALVE Carbon Steel • Type: Double Effect Overcenter Valve • Sizes: DN6-DN20 • Ends: BSP-NPT-SAE • Pressure: up to PN350 • Temp range: from -20°C to +90°C • Treatmen

Open the catalog to page 1

HYDRAULIC VALVES ❚ STRUCTURE Type and way of valve FEATURES PILOT RATIO FLUID VISCOSITY FLUID TEMPERATURE AMBIENT TEMPERATURE STANDARD SEALS Steel cap Std. Tamper proof cap *On request • Pilot ratio 8:1 and 11:1 • Bigger sizes • Tamper proof cap

Open the catalog to page 2

HYDRAULIC VALVES VODE G 1/4 6 VODE G 3/8 10 VODE G 1/2 13 VODE G 3/4 20 STANDARD SETTING SETTING RANGE mm inch mm inch mm inch mm inch The company reserves the right to operate dimensional changes without prior notice. PILOT MAX FLOW WEIGHT RATIO (l/min)

Open the catalog to page 3

HYDRAULIC VALVES VODE N 1/4 6 VODE N 3/8 10 VODE N 1/2 13 VODE N 3/4 20 STANDARD SETTING SETTING RANGE mm inch mm inch mm inch mm inch PILOT MAX FLOW WEIGHT RATIO (l/min) VODE SAE 4 6 VODE SAE 6 10 VODE SAE 8 13 VODE SAE 12 20 STANDARD SETTING SETTING RANGE mm inch mm inch mm inch mm inch PILOT MAX FLOW WEIGHT RATIO (l/min) The company reserves the right to operate dimensional changes without prior no

Open the catalog to page 4