Standard Composition of Valve
This document outlines the specifications and components of the GE Series hydraulic ball valves, specifically focusing on the 2-way high-pressure ball valves made from carbon steel. The valves are available in sizes ranging from DN13 to DN32 and are designed to handle pressures up to PN420 or S3000-S6000. They operate within a temperature range of -20°C to +100°C and are galvanized for protection.

Specifications

• Type: Ball valve, 2-way
• Sizes: DN13 to DN32
• Ends: ISO6162-1/-2 (SAE J518)
• Pressure: Up to PN420 / S3000-S6000
• Temperature Range: -20°C to +100°C
• Treatment: Galvanized

Materials

• Body, Closure, Ball, Stem, Pin, Washer: 1,0737 Carbon Steel
• Ball Seat, Stem Ring: POM
• Spring, Spring Ball: 1,0116
• O-Rings: FKM
• Screw: DIN 7991 8.8

Valve Code Structure
The valve code includes information about the type, ends, size, body material, adapter material, stem material, ball material, ball seat material, and seal material. Options for special requests include reduced bore, special threads, locking devices, and pressure classes up to PN6000 Psi.

Dimensional Data
The document provides detailed dimensional data for various valve sizes (DN13, DN20, DN25, DN32) including measurements in both metric (mm) and imperial (inch) units, as well as weight in kilograms and pounds. The data includes dimensions such as length, width, height, and diameter of various components.

Additional Notes
The company reserves the right to make dimensional changes without prior notice. For special requests, consultation with the technical/commercial service is recommended.