HYDRAULIC BALL VALVES ❚ GV3 3-WAY HIGH PRESSURE BALL VALVES Carbon Steel ❚ STANDARD COMPOSITION OF VALVE • Type: ball valve 3 way • Sizes: from DN10 up to DN32 • Ends: BSP-NPT-SAE / ISO6162-1 • Pressure: up to PN500 / S6000 • Temp range: from -20°C to +100°C • Treatment: Galvanized WARNING! Pressure inlet only from center port 1 REGISTERED DESIGN Body Adapter Ball Stem Ball seat Pin Stem ring Spring UNl17223-1 Spring ball Stem o-ring Adapter o-ring Adapter o-ring Washer Screw Caps

HYDRAULIC BALL VALVES ❚ CODE DESCRIPTION STRUCTURE GV3 Type and way of valve GV3 3-way Ends GAS DIN/ ISO 228 BSP Size from DN10 to DN32 Body Material ● 1 = 1,0737 Adapter material ● 1 = 1,0737 Stem material ● 1 = 1,0737 Ball Material ● 1 = 1,0737 Seat material A = POM D = PEEK* K = GEMPTFE* C = PTFE* Seal material B = NBR E = FKM* F = EPDM* L = MVQ* *On request • Reduced bore • Special threads • Pressure class up to PN50 Mpa • Pressure class up to PN6000 Psi • Locking device For further special requests please consult our technical/co

HYDRAULIC BALL VALVES The company reserves the right to operate dimensional changes without prior notice. ITEM CODE

HYDRAULIC BALL VALVES ❚ WELD MOUNTING PLATES ❚ Lateral plate TYPE GV LATERAL PLATE Phosphated Phosphated ❚ Low plate TYPE GV LOW PLATE Lateral plate Carbon Steel Carbon Steel The company reserves the right to operate dimensional changes without pr